Licensed electricians, contractors, and maintenance professionals face genuine electrical hazards on every job—from arc flash risks to working at heights. iSupply Electrical provides the complete range of certified safety and personal protective equipment (PPE) needed to meet Australian workplace safety standards and protect teams across residential, commercial, and industrial projects.​
Working on or near energised electrical equipment requires flame-retardant clothing, insulated protective equipment, and certified safety gear that meets AS/NZS 4863:2011 standards. iSupply stocks comprehensive safety solutions designed specifically for the electrical trade, from everyday PPE essentials to specialized equipment for high-risk environments.​
The safety category includes boots engineered with non-conductive soles for electrical work, gloves rated for insulation protection, and head protection meeting Australian Standards for impact and electrical hazards. For professionals working above ground, height safety equipment including certified harnesses and fall arrest systems ensures compliance and protection.​
Electrical contractors require specialized protection beyond standard PPE. The electrical rescue kits provide critical emergency response equipment, while liveline equipment enables safe work on energised systems when de-energisation isn’t practical. Comprehensive first aid supplies keep worksites prepared for any incident.​
For hazardous work environments, mats and covers offer insulation and protection from electrical contact. Accurate meters enable safe voltage testing and verification before work begins. Professional lockout systems ensure proper isolation procedures are followed during maintenance and installation work.​
Complete protection means covering every potential exposure point. Upper body protection includes arc-rated shirts and flame-resistant jackets that meet thermal hazard requirements for electrical work. Leg protection encompasses arc-rated trousers and protective chaps designed for the electrical trade.​
For professionals working outdoors year-round, winter protection gear maintains safety ratings while providing weather protection. Pre-assembled kits bundle essential safety equipment for specific applications, ensuring crews have the right protection for each job type. Site and traffic safety equipment keeps work areas properly marked and protected from external hazards.​
All safety and PPE products meet relevant Australian and New Zealand standards including AS/NZS 4863:2011, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. iSupply sources certified equipment that helps electricians and contractors meet workplace health and safety obligations without compromise.​
Browse the complete safety range with live stock levels displayed Australia-wide, competitive wholesale pricing for trade professionals, and fast delivery to keep projects moving safely. Whether outfitting a new crew or restocking essential PPE, iSupply Electrical provides the certified protection Australian electrical professionals rely on.​
Licensed electricians working on or near electrical installations must wear flame-retardant clothing, insulated gloves meeting AS/NZS 2225 standards, non-conductive footwear, safety glasses, and arc-rated face shields when required. Head protection must be non-conductive, and full arm and leg coverage is mandatory for work on energised systems.​
Australian electrical work is governed by AS/NZS 4863:2011 for safe working on low-voltage installations, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. All protective equipment must meet these standards, with insulated gloves requiring testing before first use and every six months thereafter.​
Electrical rescue kits contain specialized equipment for emergency response to electrical incidents, including insulated rescue hooks and equipment for safely removing someone from electrical contact. First aid kits contain medical supplies for treating injuries and must be compliant with workplace requirements for team size and work type.​
Lockout systems ensure electrical equipment remains safely isolated during maintenance, installation, or repair work. Proper lockout procedures prevent accidental re-energisation that could cause serious injury or death, and are required under Australian workplace safety regulations.​
Electricians should wear non-conductive boots with electrical hazard (EH) rating that provide insulation from electrical shock. Steel-toed boots should be avoided as steel conducts electricity—instead, choose composite toe boots that offer impact protection without conductivity risks.​
Yes, insulating mats and covers used for electrical work must be rated for the voltage levels present in the work environment. These products provide temporary insulation and protection from accidental electrical contact when working on or near energised equipment.​
Electricians working at heights require certified harnesses, lanyards, and anchoring systems that meet Australian fall protection standards. Fall arrest equipment must be regularly inspected, and workers must be trained in proper use and self-rescue procedures.​
Insulating gloves must be tested by a qualified third party before initial use and every six months during regular use. Additional testing is required after repairs, if used without leather protectors, or if there are any signs of damage or insulation concerns.​
Showing 481–496 of 748 results
The Eveready Non-Conductive Torch TORCH 4AA delivers up to 100 lumens and a 75m beam with a shatterproof lens, non-slip handle and waterproof construction. Supplied with four AA batteries, it offers an expected 23-hour runtime, giving electricians, contractors and maintenance professionals dependable portable lighting for demanding work environments and jobsites.
Volt MET-V-T895 non-contact phase rotation tester identifies phase sequence and open phases on three-phase systems, with clear LED and audible indicators.
The Bool HRC3 Parka provides 26.0 cal/cm² HRC3 protection in a waterproof, insulated and high-visibility design. With FR materials, anti-static fabric, reflective tape, sealed seams and zip-off sleeves, it is suited to demanding electrical, industrial and outdoor work environments.
The Bool HRC3 Parka combines arc flash protection, high visibility and weather-resistant construction for demanding electrical, industrial and outdoor work. Rated for HRC3 environments up to 26.0 cal/cm², it features sealed seams, breathable waterproof fabric, anti-static properties, FR fleece and reflective tape.
Rated HRC3 to 26.0 cal/cm², the Bool Orange/Navy Hi-Vis Parka combines arc-rated and flame-resistant construction with waterproofing, insulation and reflective detailing. Its zip-off sleeves provide added versatility, while anti-static fabric, sealed seams and radio loops support practical use by electrical and industrial workers.
The Bool HRC3 Parka combines 26.0 cal/cm² HRC3 protection with high visibility, waterproof construction and practical features for demanding electrical and industrial work. Its FR lining, anti-static fabric, reflective tape and insulated design support protection and visibility across challenging conditions, while zip-off sleeves provide added versatility for changing temperatures.
HRC3 hi-vis parka designed for demanding electrical and industrial environments, combining 26.0 cal/cm² protection, waterproof construction, visibility and versatile zip-off sleeves.
Bool HRC3 Parka in Orange/Navy provides HRC3 protection up to 26.0 cal/cm² alongside waterproof construction, sealed seams and high-visibility reflective detailing. Its insulated design, anti-static fabric and flame-resistant features suit demanding electrical, maintenance and industrial environments where visibility and protective workwear are essential.
Stay protected and visible in demanding electrical work environments with the Bool HRC3 Parka, combining 26.0 cal/cm² protection, flame-resistant construction, waterproof performance and practical trade features. The Yellow/Navy design improves visibility, while zip-off sleeves, radio loops and lanyard access support everyday electrical and maintenance work.
The Bool HRC3 Parka provides 26.0 cal/cm² HRC3 protection with waterproof, breathable and insulated construction. Its hi-vis reflective design, anti-static fabric, zip-off sleeves and trade-focused features suit demanding electrical and industrial work.
The Bool HRC3 Parka combines arc-flash protection, high visibility and weather resistance in a practical garment for demanding electrical and industrial environments. Rated HRC3 up to 26.0 cal/cm², it features waterproof sealed seams, anti-static fabric, FR construction, reflective tape and zip-off sleeves for versatile site use.
The Bool HRC3 Parka provides electrical trades with a practical protective outer layer for demanding work environments. Rated HRC3 up to 26.0 cal/cm², it combines waterproof, breathable and insulated construction with FR and anti-static features. Reflective tape, biomotion visibility, zip-off sleeves and lanyard access add practical functionality for changing conditions.
Bool HRC3 Parka provides protective outerwear for demanding electrical and maintenance environments. Rated for HRC3 applications up to 26.0 cal/cm², it combines flame-resistant construction, anti-static fabric, high visibility, waterproof protection and insulation. Zip-off sleeves provide added versatility, while reflective tape enhances visibility in challenging work conditions.
The Bool HRC3 Parka provides protective, high-visibility workwear for demanding electrical and industrial environments. Rated up to 26.0 cal/cm², it features waterproof construction, sealed seams, FR fleece, anti-static fabric, reflective tape, insulation and zip-off sleeves. The yellow/navy design supports visibility while practical features accommodate communication equipment and lanyard access.
The Linq 2m Pole Strap with snap hooks is designed for pole top rescue, helping provide a secure connection when recovering a suspended worker. Featuring two snap hooks and a web protective sheath, this rescue strap supports practical, ergonomic use while helping maintain strap integrity during demanding work-at-height applications.
The LINQ Pole Top Rescue Kit provides a pre-assembled rescue solution for suspended workers, featuring a 4:1 pulley system, 50m static kernmantle rope and backup braking mechanism. Designed for efficient raising and lowering, it includes essential anchoring and rescue components in a heavy-duty carry bag for convenient on-site deployment.