Licensed electricians, contractors, and maintenance professionals face genuine electrical hazards on every job—from arc flash risks to working at heights. iSupply Electrical provides the complete range of certified safety and personal protective equipment (PPE) needed to meet Australian workplace safety standards and protect teams across residential, commercial, and industrial projects.​
Working on or near energised electrical equipment requires flame-retardant clothing, insulated protective equipment, and certified safety gear that meets AS/NZS 4863:2011 standards. iSupply stocks comprehensive safety solutions designed specifically for the electrical trade, from everyday PPE essentials to specialized equipment for high-risk environments.​
The safety category includes boots engineered with non-conductive soles for electrical work, gloves rated for insulation protection, and head protection meeting Australian Standards for impact and electrical hazards. For professionals working above ground, height safety equipment including certified harnesses and fall arrest systems ensures compliance and protection.​
Electrical contractors require specialized protection beyond standard PPE. The electrical rescue kits provide critical emergency response equipment, while liveline equipment enables safe work on energised systems when de-energisation isn’t practical. Comprehensive first aid supplies keep worksites prepared for any incident.​
For hazardous work environments, mats and covers offer insulation and protection from electrical contact. Accurate meters enable safe voltage testing and verification before work begins. Professional lockout systems ensure proper isolation procedures are followed during maintenance and installation work.​
Complete protection means covering every potential exposure point. Upper body protection includes arc-rated shirts and flame-resistant jackets that meet thermal hazard requirements for electrical work. Leg protection encompasses arc-rated trousers and protective chaps designed for the electrical trade.​
For professionals working outdoors year-round, winter protection gear maintains safety ratings while providing weather protection. Pre-assembled kits bundle essential safety equipment for specific applications, ensuring crews have the right protection for each job type. Site and traffic safety equipment keeps work areas properly marked and protected from external hazards.​
All safety and PPE products meet relevant Australian and New Zealand standards including AS/NZS 4863:2011, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. iSupply sources certified equipment that helps electricians and contractors meet workplace health and safety obligations without compromise.​
Browse the complete safety range with live stock levels displayed Australia-wide, competitive wholesale pricing for trade professionals, and fast delivery to keep projects moving safely. Whether outfitting a new crew or restocking essential PPE, iSupply Electrical provides the certified protection Australian electrical professionals rely on.​
Licensed electricians working on or near electrical installations must wear flame-retardant clothing, insulated gloves meeting AS/NZS 2225 standards, non-conductive footwear, safety glasses, and arc-rated face shields when required. Head protection must be non-conductive, and full arm and leg coverage is mandatory for work on energised systems.​
Australian electrical work is governed by AS/NZS 4863:2011 for safe working on low-voltage installations, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. All protective equipment must meet these standards, with insulated gloves requiring testing before first use and every six months thereafter.​
Electrical rescue kits contain specialized equipment for emergency response to electrical incidents, including insulated rescue hooks and equipment for safely removing someone from electrical contact. First aid kits contain medical supplies for treating injuries and must be compliant with workplace requirements for team size and work type.​
Lockout systems ensure electrical equipment remains safely isolated during maintenance, installation, or repair work. Proper lockout procedures prevent accidental re-energisation that could cause serious injury or death, and are required under Australian workplace safety regulations.​
Electricians should wear non-conductive boots with electrical hazard (EH) rating that provide insulation from electrical shock. Steel-toed boots should be avoided as steel conducts electricity—instead, choose composite toe boots that offer impact protection without conductivity risks.​
Yes, insulating mats and covers used for electrical work must be rated for the voltage levels present in the work environment. These products provide temporary insulation and protection from accidental electrical contact when working on or near energised equipment.​
Electricians working at heights require certified harnesses, lanyards, and anchoring systems that meet Australian fall protection standards. Fall arrest equipment must be regularly inspected, and workers must be trained in proper use and self-rescue procedures.​
Insulating gloves must be tested by a qualified third party before initial use and every six months during regular use. Additional testing is required after repairs, if used without leather protectors, or if there are any signs of damage or insulation concerns.​
Showing 33–48 of 748 results
The Volt Safety HRC2 Arc Flash Kit includes an 8.6 cal/cm² 4XL coverall, 10.7 cal/cm² face shield, Class 0 insulated gloves, balaclava, helmet and waterproof PPE bag.
Complete HRC2 arc flash PPE kit in Small 87R, rated up to 8.6 cal/cm². Includes coverall, face shield, balaclava, Class 0 gloves, helmet and waterproof PPE bag.
Complete PPE for HRC2 electrical work, this Volt Safety Arc Flash Kit includes an 8.6 cal/cm² coverall, 10.7 cal/cm² face shield, Class 0 insulated gloves, balaclava, helmet and waterproof PPE bag. Size 92R M provides a convenient protective package for electricians and maintenance professionals.
Complete HRC2 PPE package for electrical work, combining an 8.6 cal/cm² coverall, 10.7 cal/cm² face shield, Class 0 insulated gloves, balaclava, helmet and waterproof PPE bag. Size 97R L.
A complete five-piece BSD arc flash PPE kit for HRC3 environments up to 28 cal/cm². The 2XL navy kit includes a hood with helmet and bracket, jacket, dungarees, gloves and storage bag.
The BSD HRC3 Arc Flash Kit combines a 28 cal/cm² hood, helmet, jacket, dungarees and gloves in a convenient five-piece PPE set. Its double-layer cotton, polyamide and carbon fabric construction is designed for HRC3 electrical environments, with a storage bag included for transport and protection.
BSD ARC-KIT3-B-L provides a convenient, coordinated HRC3 PPE solution for electrical professionals requiring arc flash protection up to 28cal/cm². With a five-piece configuration, double-layer protective fabric and supplied storage bag, it is suited to demanding electrical work where appropriate arc flash PPE is required.
Complete HRC3 arc flash PPE rated to 28cal/cm², including hood, jacket, dungarees, gloves and storage bag. Ideal for electrical contractors and maintenance professionals.
The BSD HRC3 Arc Flash Kit combines essential protective clothing and equipment in one five-piece set rated to 28 cal/cm². It includes a hood with helmet and bracket, jacket, dungarees, gloves and storage bag. Double-layer cotton, polyamide and carbon fabric provides a practical PPE solution for electrical work.
The BSD HRC3 Arc Flash Kit provides five essential PPE components for electrical work in environments up to 28 cal/cm². This Size XL kit includes a hood with helmet and bracket, jacket, dungarees, gloves and storage bag.
ArcPlus Ultralight HRC4 Arc Flash Kit 50cal/cm² — lightweight, breathable PPE with jacket, trousers, hood and dielectric eyewear for demanding electrical work.
The ArcPlus Ultralight HRC4 Arc Flash Kit combines 50 cal/cm² protection with a lightweight 315 gsm single-layer design. Supplied with a jacket, trousers, hood, dielectric eyewear and storage bags, it is built for professional electrical switching and maintenance applications.
ArcPlus Ultralight Arc Flash Kit delivers HRC4 50cal/cm² protection in a lightweight 315 gsm single-layer design. The complete kit includes jacket, trousers, dielectric eyewear and hood, with breathable construction designed for mobility and easier donning and doffing during electrical work.
ArcPlus Ultralight HRC4 Arc Flash Kit provides 50 cal/cm² protection in a lightweight 315 gsm single-layer design. The breathable kit includes jacket, trousers, hood, dielectric eyewear and storage bags for practical electrical work.
The ArcPlus Ultralight HRC4 kit combines 50 cal/cm² arc flash protection with a lightweight 315 gsm single-layer design. Supplied with jacket, trousers, hood, dielectric eyewear and storage bags, it is designed for demanding electrical switching and maintenance work.
The ArcPlus Ultralight HRC4 Arc Flash Kit provides 50 cal/cm² HRC4 protection in a lightweight 315 gsm single-layer design. With a jacket, trousers, hood, dielectric eyewear and storage bags included, it offers practical PPE for professional electrical switching and maintenance work.