Licensed electricians, contractors, and maintenance professionals face genuine electrical hazards on every job—from arc flash risks to working at heights. iSupply Electrical provides the complete range of certified safety and personal protective equipment (PPE) needed to meet Australian workplace safety standards and protect teams across residential, commercial, and industrial projects.​
Working on or near energised electrical equipment requires flame-retardant clothing, insulated protective equipment, and certified safety gear that meets AS/NZS 4863:2011 standards. iSupply stocks comprehensive safety solutions designed specifically for the electrical trade, from everyday PPE essentials to specialized equipment for high-risk environments.​
The safety category includes boots engineered with non-conductive soles for electrical work, gloves rated for insulation protection, and head protection meeting Australian Standards for impact and electrical hazards. For professionals working above ground, height safety equipment including certified harnesses and fall arrest systems ensures compliance and protection.​
Electrical contractors require specialized protection beyond standard PPE. The electrical rescue kits provide critical emergency response equipment, while liveline equipment enables safe work on energised systems when de-energisation isn’t practical. Comprehensive first aid supplies keep worksites prepared for any incident.​
For hazardous work environments, mats and covers offer insulation and protection from electrical contact. Accurate meters enable safe voltage testing and verification before work begins. Professional lockout systems ensure proper isolation procedures are followed during maintenance and installation work.​
Complete protection means covering every potential exposure point. Upper body protection includes arc-rated shirts and flame-resistant jackets that meet thermal hazard requirements for electrical work. Leg protection encompasses arc-rated trousers and protective chaps designed for the electrical trade.​
For professionals working outdoors year-round, winter protection gear maintains safety ratings while providing weather protection. Pre-assembled kits bundle essential safety equipment for specific applications, ensuring crews have the right protection for each job type. Site and traffic safety equipment keeps work areas properly marked and protected from external hazards.​
All safety and PPE products meet relevant Australian and New Zealand standards including AS/NZS 4863:2011, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. iSupply sources certified equipment that helps electricians and contractors meet workplace health and safety obligations without compromise.​
Browse the complete safety range with live stock levels displayed Australia-wide, competitive wholesale pricing for trade professionals, and fast delivery to keep projects moving safely. Whether outfitting a new crew or restocking essential PPE, iSupply Electrical provides the certified protection Australian electrical professionals rely on.​
Licensed electricians working on or near electrical installations must wear flame-retardant clothing, insulated gloves meeting AS/NZS 2225 standards, non-conductive footwear, safety glasses, and arc-rated face shields when required. Head protection must be non-conductive, and full arm and leg coverage is mandatory for work on energised systems.​
Australian electrical work is governed by AS/NZS 4863:2011 for safe working on low-voltage installations, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. All protective equipment must meet these standards, with insulated gloves requiring testing before first use and every six months thereafter.​
Electrical rescue kits contain specialized equipment for emergency response to electrical incidents, including insulated rescue hooks and equipment for safely removing someone from electrical contact. First aid kits contain medical supplies for treating injuries and must be compliant with workplace requirements for team size and work type.​
Lockout systems ensure electrical equipment remains safely isolated during maintenance, installation, or repair work. Proper lockout procedures prevent accidental re-energisation that could cause serious injury or death, and are required under Australian workplace safety regulations.​
Electricians should wear non-conductive boots with electrical hazard (EH) rating that provide insulation from electrical shock. Steel-toed boots should be avoided as steel conducts electricity—instead, choose composite toe boots that offer impact protection without conductivity risks.​
Yes, insulating mats and covers used for electrical work must be rated for the voltage levels present in the work environment. These products provide temporary insulation and protection from accidental electrical contact when working on or near energised equipment.​
Electricians working at heights require certified harnesses, lanyards, and anchoring systems that meet Australian fall protection standards. Fall arrest equipment must be regularly inspected, and workers must be trained in proper use and self-rescue procedures.​
Insulating gloves must be tested by a qualified third party before initial use and every six months during regular use. Additional testing is required after repairs, if used without leather protectors, or if there are any signs of damage or insulation concerns.​
Showing 17–32 of 748 results
The Sherwood 43cal HRC4 arc flash kit provides complete protection for high-risk electrical work, combining a vented Nomex hood, switching coat, leggings, gloves, hard hat and waterproof PPE bag. Designed for environments up to 43 cal/cm², it supports professional electrical maintenance and switching applications.
The Sherwood 43cal Vented SWC Nomex Arc Flash Kit is a complete HRC4 PPE solution designed for electrical work in environments with arc flash hazards up to 43cal/cm². Supplied in a practical PPE bag, the kit combines a protective hood, switching coat, leggings, arc flash gloves and MSA V-Gard 500 hard hat.
The Sherwood 43cal Vented SWC Nomex Arc Flash Kit is supplied as a complete PPE package for applications requiring HRC4 arc flash protection up to 43 cal/cm². The XL kit includes a vented hood, switching coat, leggings, gloves, MSA V-Gard 500 hard hat and waterproof PPE bag.
The Linq 450mm absorber lanyard features two screw gate karabiners, durable polyester webbing and fall-arrest energy absorption for professional height-safety applications. Rated for workers up to 160kg including tools and equipment, it meets AS/NZS 1891.1 requirements and provides a practical, durable connection for trade and industrial work at height.
Volt Safety’s Aluminium 6 Hole Lockout Hasp features a 25mm jaw and accommodates up to six padlocks for multi-worker equipment isolation. Made from spark-proof aluminium with a nylon coating, it accepts padlock shanks up to 10mm and complies with AS 4836 and AS 4024.1603 for trade applications.
The Volt Safety Aluminium 6 Hole Lockout Hasp provides secure multi-worker equipment isolation with a durable spark-proof aluminium body, nylon coating and six padlock positions. Its 38mm jaw accepts padlock shanks up to 10mm and complies with AS 4836 and AS 4024.1603.
Arc flash protection starts with the right PPE. The Portwest HRC2 Arc Flash Balaclava delivers 22 cal/cm² ATPV protection with a two-layer, inherently flame-resistant Modaflame knit construction. Its antistatic properties, UPF 50+ rating and high cotton content provide a practical balance of protection and comfort for demanding electrical and industrial work environments.
Arc-rated HRC2 balaclava with lightweight Merino FR blend for safe, comfortable arc flash protection under helmets.
The BSD HRC3 34 cal/cm² Arc Flash Balaclava provides integrated head and neck coverage in a comfortable double-layer design. With universal sizing and compatibility with safety helmets, it is a practical PPE option for electricians, contractors and maintenance professionals working in arc flash risk environments.
The BSD ARC-FS+H provides integrated HRC2 head and face protection for electrical professionals working in environments where arc flash hazards need to be considered. Its adjustable helmet, impact-resistant face shield, chin guard and protective storage bag make it a practical addition to professional electrical PPE.
The BSD ARC-FS 2PLUS+H combines HRC2 12 cal/cm² arc flash face protection with a durable adjustable helmet for electrical trade work. Its impact-resistant shield, chin guard, UV resistance, six-point harness and ratchet adjustment provide practical protection and fit. Supplied with a protective bag, it is suitable for professional electrical maintenance and installation applications.
Protect your face and chin with the BSD ARC-FS 2PLUS HRC2 Arc Flash Face Shield. Rated up to 12 cal/cm², it features transparent chin protection, medium-impact protection, a light smoke tint and a universal fitting system for standard peaked hard hats.
Arc flash HRC2 head protection kit providing compliant 10.7cal/cm² protection for electricians working in high-risk environments.
Complete HRC2 arc flash PPE kit for electrical work up to 8.6 cal/cm². Includes XL 102R coverall, 10.7 cal/cm² face shield, balaclava, Class 0 insulated gloves, helmet and waterproof PPE bag.
Complete HRC2 arc flash protection with the Volt Safety ARC-KIT2-107R. This 2XL kit includes an 8.6 cal/cm² coverall, 10.7 cal/cm² face shield, Class 0 1000V insulated gloves, balaclava, helmet and heavy-duty waterproof PPE bag. It provides essential PPE for applicable electrical work in arc flash environments.
The Volt Safety ARC-KIT2-112R is a complete HRC2 arc flash PPE kit in 3XL/112R, rated up to 8.6 cal/cm². It includes a coverall, face shield, balaclava, Class 0 insulated gloves, electrician’s helmet and heavy-duty waterproof PPE bag for convenient storage and transport.