Licensed electricians, contractors, and maintenance professionals face genuine electrical hazards on every job—from arc flash risks to working at heights. iSupply Electrical provides the complete range of certified safety and personal protective equipment (PPE) needed to meet Australian workplace safety standards and protect teams across residential, commercial, and industrial projects.​
Working on or near energised electrical equipment requires flame-retardant clothing, insulated protective equipment, and certified safety gear that meets AS/NZS 4863:2011 standards. iSupply stocks comprehensive safety solutions designed specifically for the electrical trade, from everyday PPE essentials to specialized equipment for high-risk environments.​
The safety category includes boots engineered with non-conductive soles for electrical work, gloves rated for insulation protection, and head protection meeting Australian Standards for impact and electrical hazards. For professionals working above ground, height safety equipment including certified harnesses and fall arrest systems ensures compliance and protection.​
Electrical contractors require specialized protection beyond standard PPE. The electrical rescue kits provide critical emergency response equipment, while liveline equipment enables safe work on energised systems when de-energisation isn’t practical. Comprehensive first aid supplies keep worksites prepared for any incident.​
For hazardous work environments, mats and covers offer insulation and protection from electrical contact. Accurate meters enable safe voltage testing and verification before work begins. Professional lockout systems ensure proper isolation procedures are followed during maintenance and installation work.​
Complete protection means covering every potential exposure point. Upper body protection includes arc-rated shirts and flame-resistant jackets that meet thermal hazard requirements for electrical work. Leg protection encompasses arc-rated trousers and protective chaps designed for the electrical trade.​
For professionals working outdoors year-round, winter protection gear maintains safety ratings while providing weather protection. Pre-assembled kits bundle essential safety equipment for specific applications, ensuring crews have the right protection for each job type. Site and traffic safety equipment keeps work areas properly marked and protected from external hazards.​
All safety and PPE products meet relevant Australian and New Zealand standards including AS/NZS 4863:2011, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. iSupply sources certified equipment that helps electricians and contractors meet workplace health and safety obligations without compromise.​
Browse the complete safety range with live stock levels displayed Australia-wide, competitive wholesale pricing for trade professionals, and fast delivery to keep projects moving safely. Whether outfitting a new crew or restocking essential PPE, iSupply Electrical provides the certified protection Australian electrical professionals rely on.​
Licensed electricians working on or near electrical installations must wear flame-retardant clothing, insulated gloves meeting AS/NZS 2225 standards, non-conductive footwear, safety glasses, and arc-rated face shields when required. Head protection must be non-conductive, and full arm and leg coverage is mandatory for work on energised systems.​
Australian electrical work is governed by AS/NZS 4863:2011 for safe working on low-voltage installations, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. All protective equipment must meet these standards, with insulated gloves requiring testing before first use and every six months thereafter.​
Electrical rescue kits contain specialized equipment for emergency response to electrical incidents, including insulated rescue hooks and equipment for safely removing someone from electrical contact. First aid kits contain medical supplies for treating injuries and must be compliant with workplace requirements for team size and work type.​
Lockout systems ensure electrical equipment remains safely isolated during maintenance, installation, or repair work. Proper lockout procedures prevent accidental re-energisation that could cause serious injury or death, and are required under Australian workplace safety regulations.​
Electricians should wear non-conductive boots with electrical hazard (EH) rating that provide insulation from electrical shock. Steel-toed boots should be avoided as steel conducts electricity—instead, choose composite toe boots that offer impact protection without conductivity risks.​
Yes, insulating mats and covers used for electrical work must be rated for the voltage levels present in the work environment. These products provide temporary insulation and protection from accidental electrical contact when working on or near energised equipment.​
Electricians working at heights require certified harnesses, lanyards, and anchoring systems that meet Australian fall protection standards. Fall arrest equipment must be regularly inspected, and workers must be trained in proper use and self-rescue procedures.​
Insulating gloves must be tested by a qualified third party before initial use and every six months during regular use. Additional testing is required after repairs, if used without leather protectors, or if there are any signs of damage or insulation concerns.​
Showing 513–528 of 748 results
Bool HRC2 Orange/Navy Softshell Jacket combines 17.4 cal/cm² protection with inherent FR fabric, insulation, anti-static performance and high-visibility reflective tape for demanding work environments.
Built for cold-weather trade work, the Bool HRC2 Softshell Jacket combines 17.4 cal/cm² HRC2 protection, inherent flame resistance, high visibility and insulated comfort in one practical layer. The orange/navy design features reflective tape, anti-static fabric, FR fleece and durable three-layer softshell construction for demanding electrical and industrial environments.
Bool’s HRC2 Softshell Jacket combines 17.4 cal/cm² protection with an insulated three-layer design for demanding trade environments. Featuring inherent flame resistance, anti-static fabric, hi-vis reflective tape, biomotion visibility, Nomex FR zippers and a radio loop, it is designed for electrical, maintenance and industrial work in colder conditions.
Stay warm and visible with the Bool HRC2 Softshell Jacket. Featuring inherent FR construction, 360gsm three-layer softshell fabric, anti-static properties and reflective tape, it is designed for HRC2 environments up to 17.4 cal/cm². The Yellow/Navy 2XL jacket suits electrical, construction and maintenance work in cold conditions.
Warm, protective and highly visible, the Bool Softshell Jacket combines HRC2 protection with an insulated three-layer design for demanding electrical and industrial work. Its inherent FR fabric, anti-static properties, reflective tape and biomotion configuration support protection, visibility and comfort in cold working conditions.
Bool HRC2 Softshell Jacket in yellow/navy provides insulated cold-weather comfort, inherent flame-retardant protection and high visibility for demanding electrical and industrial work. The 360gsm three-layer design features anti-static fabric, FR fleece, reflective tape, Nomex FR zippers and Biomotion visibility detailing. Rated HRC2 to 17.4 cal/cm².
Bool’s Yellow/Navy HRC2 Softshell Jacket provides flame-resistant, anti-static and insulated protection for demanding trade environments. With 17.4 cal/cm² HRC2 protection, high-visibility reflective tape, biomotion detailing and 50+ UPF, it is designed for electrical, construction and maintenance work in cold conditions.
The Bool HRC2 Softshell Jacket combines flame-retardant protection, high visibility and cold-weather insulation in a practical three-layer design. With an inherent FR fabric construction, anti-static properties, reflective tape, biomotion visibility and Nomex FR zippers, it is suited to demanding electrical and trade environments.
Protective outerwear for HRC2 environments, the Bool Softshell Jacket combines 17.4 cal/cm² protection, inherent FR materials, anti-static construction and high-visibility reflective detailing. Its insulated 360gsm three-layer softshell design provides warmth and visibility for demanding electrical, industrial and outdoor work.
Stanley Fatmax Hard Shell Knee Pads deliver durable knee protection with a rigid hybrid cap, traction surface, and high-density foam cushioning for superior comfort during extended kneeling tasks. Ideal for electricians, contractors, builders, and maintenance professionals working across residential, commercial, and industrial job sites throughout Australia.
Experience all-day comfort with Stanley Fatmax Heavy Duty Gel Knee Pads featuring heavy-duty gel cushioning, a deep molded knee cradle, and an extra-wide neoprene strap for a secure fit. Designed for electricians, builders, and maintenance professionals requiring dependable knee protection on demanding Australian job sites.
Protect your knees with Stanley Fatmax Soft Shell Knee Pads featuring thick high-density foam cushioning and dual elastic straps for secure, comfortable all-day wear. Ideal for electricians, builders, maintenance professionals, and tradespeople working on residential, commercial, and industrial projects across Australia.
The Stanley Fatmax Stabilized Knee Pads provide comfortable knee protection with a secure extra-wide neoprene strap and moulded foam support. Designed for professional tradespeople, they deliver stability, comfort, and dependable performance during extended kneeling tasks across residential, commercial, and industrial worksites throughout Australia.
Supreme Tower Worker Harness designed for professional work at height, featuring durable UV-stabilised webbing, padded comfort features, practical attachment points and AS/NZS 1891.1 compliance.
The Linq Supreme Tower Worker Harness XL/2XL delivers secure, comfortable support for tower work, construction, scaffolding, ladders and confined spaces, with practical attachment points, UV-stabilised webbing, reflective thread, padded straps and AS/NZS 1891.1 compliance. Liqui-Pel protection also helps shield the harness from liquids while making cleaning easier after demanding worksite use.
30m flexible trailing earth lead kit with banana plugs, detachable clip, and stainless steel stake for fast, reliable electrical testing.