Licensed electricians, contractors, and maintenance professionals face genuine electrical hazards on every job—from arc flash risks to working at heights. iSupply Electrical provides the complete range of certified safety and personal protective equipment (PPE) needed to meet Australian workplace safety standards and protect teams across residential, commercial, and industrial projects.​
Working on or near energised electrical equipment requires flame-retardant clothing, insulated protective equipment, and certified safety gear that meets AS/NZS 4863:2011 standards. iSupply stocks comprehensive safety solutions designed specifically for the electrical trade, from everyday PPE essentials to specialized equipment for high-risk environments.​
The safety category includes boots engineered with non-conductive soles for electrical work, gloves rated for insulation protection, and head protection meeting Australian Standards for impact and electrical hazards. For professionals working above ground, height safety equipment including certified harnesses and fall arrest systems ensures compliance and protection.​
Electrical contractors require specialized protection beyond standard PPE. The electrical rescue kits provide critical emergency response equipment, while liveline equipment enables safe work on energised systems when de-energisation isn’t practical. Comprehensive first aid supplies keep worksites prepared for any incident.​
For hazardous work environments, mats and covers offer insulation and protection from electrical contact. Accurate meters enable safe voltage testing and verification before work begins. Professional lockout systems ensure proper isolation procedures are followed during maintenance and installation work.​
Complete protection means covering every potential exposure point. Upper body protection includes arc-rated shirts and flame-resistant jackets that meet thermal hazard requirements for electrical work. Leg protection encompasses arc-rated trousers and protective chaps designed for the electrical trade.​
For professionals working outdoors year-round, winter protection gear maintains safety ratings while providing weather protection. Pre-assembled kits bundle essential safety equipment for specific applications, ensuring crews have the right protection for each job type. Site and traffic safety equipment keeps work areas properly marked and protected from external hazards.​
All safety and PPE products meet relevant Australian and New Zealand standards including AS/NZS 4863:2011, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. iSupply sources certified equipment that helps electricians and contractors meet workplace health and safety obligations without compromise.​
Browse the complete safety range with live stock levels displayed Australia-wide, competitive wholesale pricing for trade professionals, and fast delivery to keep projects moving safely. Whether outfitting a new crew or restocking essential PPE, iSupply Electrical provides the certified protection Australian electrical professionals rely on.​
Licensed electricians working on or near electrical installations must wear flame-retardant clothing, insulated gloves meeting AS/NZS 2225 standards, non-conductive footwear, safety glasses, and arc-rated face shields when required. Head protection must be non-conductive, and full arm and leg coverage is mandatory for work on energised systems.​
Australian electrical work is governed by AS/NZS 4863:2011 for safe working on low-voltage installations, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. All protective equipment must meet these standards, with insulated gloves requiring testing before first use and every six months thereafter.​
Electrical rescue kits contain specialized equipment for emergency response to electrical incidents, including insulated rescue hooks and equipment for safely removing someone from electrical contact. First aid kits contain medical supplies for treating injuries and must be compliant with workplace requirements for team size and work type.​
Lockout systems ensure electrical equipment remains safely isolated during maintenance, installation, or repair work. Proper lockout procedures prevent accidental re-energisation that could cause serious injury or death, and are required under Australian workplace safety regulations.​
Electricians should wear non-conductive boots with electrical hazard (EH) rating that provide insulation from electrical shock. Steel-toed boots should be avoided as steel conducts electricity—instead, choose composite toe boots that offer impact protection without conductivity risks.​
Yes, insulating mats and covers used for electrical work must be rated for the voltage levels present in the work environment. These products provide temporary insulation and protection from accidental electrical contact when working on or near energised equipment.​
Electricians working at heights require certified harnesses, lanyards, and anchoring systems that meet Australian fall protection standards. Fall arrest equipment must be regularly inspected, and workers must be trained in proper use and self-rescue procedures.​
Insulating gloves must be tested by a qualified third party before initial use and every six months during regular use. Additional testing is required after repairs, if used without leather protectors, or if there are any signs of damage or insulation concerns.​
Showing 193–208 of 748 results
Bool Parvotex Arc Flash Shirt provides HRC2 protection up to 8.6 cal/cm². The lightweight 197gsm inherent FR fabric offers breathability, while reflective tape, radio loops and practical pockets support electrical workers in demanding environments.
The Bool Parvotex Arc Flash Shirt provides lightweight, practical workwear with HRC2 arc-flash protection for demanding electrical environments. Its inherent FR fabric, reflective detailing, storage pockets and radio loops make it suited to professional electrical and maintenance applications.
Arc Flash HRC2 FR shirt rated 8.6cal/cm² with breathable Parvotex fabric, reflective tape and trade-ready comfort for electricians.
The Bool Parvotex Arc Flash Shirt provides HRC2 protection up to 8.6 cal/cm² in a lightweight 197gsm inherent FR fabric. Yellow/Navy styling with reflective tape supports visibility, while two pockets, a pen partition and radio loops add practical functionality for electrical trade work.
The Bool Parvotex Arc Flash Shirt provides lightweight, inherent FR protection for HRC2 electrical work, rated to 8.6 cal/cm². Its 197gsm breathable fabric, reflective tape, radio loops and practical pockets support comfort, visibility and functionality. The yellow/navy design is suited to electricians, contractors and maintenance professionals working around electrical hazards.
Designed for electrical and industrial work environments requiring HRC2 arc flash protection, the Bool Parvotex Arc Flash Shirt provides an arc rating of up to 8.6 cal/cm². The shirt combines inherent flame-resistant protection with a lightweight 197gsm fabric construction designed for comfortable everyday trade use.
The Bool Parvotex HRC2 Arc Flash Coverall provides arc-rated protection up to 8.6 cal/cm² in a practical yellow/navy design. Its inherent FR Parvotex fabric, anti-static properties, reflective tape, radio loops and functional pockets make it suitable for electrical and industrial work.
The Bool Parvotex HRC2 Arc Flash Coverall provides practical FR workwear for electrical and industrial applications requiring protection up to 8.6 cal/cm². Its breathable inherent Parvotex fabric, anti-static construction, reflective detailing and trade-focused design support demanding work environments.
The Bool Arc Flash Yellow/Navy D/N Coverall provides HRC2 arc flash protection up to 8.6 cal/cm² in a practical workwear design. Its inherent Parvotex FR fabric, anti-static properties, reflective tape, radio loops and multiple workwear features make it suitable for electrical and maintenance environments. Size 112R/3XL.
The Bool HRC2 Arc Flash Coverall provides 8.6 cal/cm² protection in a practical Yellow/Navy design. Made from Parvotex FR inherent fabric with a breathable cotton blend, it features anti-static construction, reflective tape, radio loops and functional storage for electrical and maintenance work.
The Bool Parvotex HRC2 Arc Flash Coverall provides electrical workers with protective workwear rated up to 8.6 cal/cm². Its inherent Parvotex FR fabric combines breathability, anti-static properties and flame-resistant protection, with reflective tape, radio loops and practical pockets for demanding electrical and maintenance environments.
The Bool Parvotex HRC2 arc flash coverall provides protection up to 8.6 cal/cm² with breathable inherent FR fabric, anti-static properties, reflective tape and practical features for electrical and maintenance work.
Designed for HRC2 electrical environments, the Bool Parvotex Arc Flash Coverall delivers 8.6 cal/cm² protection with inherent FR fabric, anti-static performance and high-visibility yellow/navy construction. Size 97R includes practical storage, radio loops, reflective tape and a two-way zipper for demanding electrical and industrial work.
The Volt Safety Auto Retractable Cable Lockout provides a practical solution for LOTO procedures, featuring a flexible 2 m stainless steel cable, durable ABS body, auto-retract function and capacity for up to eight padlocks. Temperature resistant from -20°C to 120°C, it complies with AS 4836 and AS 4024.1603 standards.
TEKTROM Auxiliary Earth Stake – LEAD-EARTH-TTA001 provides a durable and practical solution for professional earthing resistance testing, with stainless-steel construction and a threaded handle for flexible connection options.
The BSD Arc Flash Belt 100cm provides a practical, adjustable and safety-focused belt solution for electrical and industrial work. Its flame-retardant, anti-static and non-metallic construction complements Arc Flash workwear, while the elastic design and micro-adjustable buckle provide a comfortable fit for demanding trade environments.