Licensed electricians, contractors, and maintenance professionals face genuine electrical hazards on every job—from arc flash risks to working at heights. iSupply Electrical provides the complete range of certified safety and personal protective equipment (PPE) needed to meet Australian workplace safety standards and protect teams across residential, commercial, and industrial projects.​
Working on or near energised electrical equipment requires flame-retardant clothing, insulated protective equipment, and certified safety gear that meets AS/NZS 4863:2011 standards. iSupply stocks comprehensive safety solutions designed specifically for the electrical trade, from everyday PPE essentials to specialized equipment for high-risk environments.​
The safety category includes boots engineered with non-conductive soles for electrical work, gloves rated for insulation protection, and head protection meeting Australian Standards for impact and electrical hazards. For professionals working above ground, height safety equipment including certified harnesses and fall arrest systems ensures compliance and protection.​
Electrical contractors require specialized protection beyond standard PPE. The electrical rescue kits provide critical emergency response equipment, while liveline equipment enables safe work on energised systems when de-energisation isn’t practical. Comprehensive first aid supplies keep worksites prepared for any incident.​
For hazardous work environments, mats and covers offer insulation and protection from electrical contact. Accurate meters enable safe voltage testing and verification before work begins. Professional lockout systems ensure proper isolation procedures are followed during maintenance and installation work.​
Complete protection means covering every potential exposure point. Upper body protection includes arc-rated shirts and flame-resistant jackets that meet thermal hazard requirements for electrical work. Leg protection encompasses arc-rated trousers and protective chaps designed for the electrical trade.​
For professionals working outdoors year-round, winter protection gear maintains safety ratings while providing weather protection. Pre-assembled kits bundle essential safety equipment for specific applications, ensuring crews have the right protection for each job type. Site and traffic safety equipment keeps work areas properly marked and protected from external hazards.​
All safety and PPE products meet relevant Australian and New Zealand standards including AS/NZS 4863:2011, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. iSupply sources certified equipment that helps electricians and contractors meet workplace health and safety obligations without compromise.​
Browse the complete safety range with live stock levels displayed Australia-wide, competitive wholesale pricing for trade professionals, and fast delivery to keep projects moving safely. Whether outfitting a new crew or restocking essential PPE, iSupply Electrical provides the certified protection Australian electrical professionals rely on.​
Licensed electricians working on or near electrical installations must wear flame-retardant clothing, insulated gloves meeting AS/NZS 2225 standards, non-conductive footwear, safety glasses, and arc-rated face shields when required. Head protection must be non-conductive, and full arm and leg coverage is mandatory for work on energised systems.​
Australian electrical work is governed by AS/NZS 4863:2011 for safe working on low-voltage installations, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. All protective equipment must meet these standards, with insulated gloves requiring testing before first use and every six months thereafter.​
Electrical rescue kits contain specialized equipment for emergency response to electrical incidents, including insulated rescue hooks and equipment for safely removing someone from electrical contact. First aid kits contain medical supplies for treating injuries and must be compliant with workplace requirements for team size and work type.​
Lockout systems ensure electrical equipment remains safely isolated during maintenance, installation, or repair work. Proper lockout procedures prevent accidental re-energisation that could cause serious injury or death, and are required under Australian workplace safety regulations.​
Electricians should wear non-conductive boots with electrical hazard (EH) rating that provide insulation from electrical shock. Steel-toed boots should be avoided as steel conducts electricity—instead, choose composite toe boots that offer impact protection without conductivity risks.​
Yes, insulating mats and covers used for electrical work must be rated for the voltage levels present in the work environment. These products provide temporary insulation and protection from accidental electrical contact when working on or near energised equipment.​
Electricians working at heights require certified harnesses, lanyards, and anchoring systems that meet Australian fall protection standards. Fall arrest equipment must be regularly inspected, and workers must be trained in proper use and self-rescue procedures.​
Insulating gloves must be tested by a qualified third party before initial use and every six months during regular use. Additional testing is required after repairs, if used without leather protectors, or if there are any signs of damage or insulation concerns.​
Showing 161–176 of 748 results
Sherwood’s HRC4 43 cal/cm² vented arc flash kit provides coordinated PPE for demanding electrical environments. The Medium kit includes a vented Nomex hood, jacket, bib trousers, arc flash gloves, MSA V-Gard 500 hard hat and waterproof PPE bag.
Complete 43 cal/cm² HRC4 arc flash PPE kit with Sherwood Nomex vented hood, jacket, bib trousers, gloves, hard hat and waterproof storage bag. Designed for high-risk electrical work.
Sherwood Nomex HRC4 43cal/cm² arc flash kit in XL, supplied with a vented hood, jacket, bib trousers, gloves, MSA hard hat and waterproof PPE bag. Designed for qualified electrical professionals working in HRC4 environments.
Complete HRC4 69cal/cm² arc flash PPE kit designed for maximum protection, comfort, and compliance in high-risk electrical environments.
Sherwood Nomex HRC4 arc flash PPE kit with vented hood, jacket, bib trousers, gloves and hard hat. Rated up to 69cal/cm² for high-risk electrical work.
Sherwood Nomex HRC4 Arc Flash Vented Kit in XL provides coordinated protection for electrical work in environments requiring up to 69cal/cm² arc flash PPE. The kit includes a vented hood, jacket, bib trousers, gloves, hard hat and waterproof PPE bag for convenient storage and transport.
Bool HRC2 Arc Flash Water Repellent Fleece Jumper in 2XL provides 10.6 cal/cm² arc flash protection with inherent FR fleece, water repellency, anti-static properties and reflective detailing. Designed for demanding electrical, industrial and construction work environments.
Stay warm and protected on demanding electrical jobs with the Bool’s HRC2 Arc Flash Water Repellent Fleece Jumper. Its 280gsm inherent FR fleece, anti-static construction, water-repellent finish and high-visibility reflective tape provide practical protection for electrical and industrial work. The orange/navy 2XL design combines comfort, visibility and job-ready functionality.
The Bool’s HRC2 Arc Flash Two Tone Water Repellent Fleece Jumper combines HRC2 arc flash protection with inherent flame resistance, anti-static properties and water repellency. Its reflective tape, two-tone design and practical construction make it suitable for electricians and maintenance professionals working in demanding electrical environments.
The Bool HRC2 Arc Flash Water Repellent Fleece Jumper provides protective workwear for electrical and industrial environments, combining 10.6 cal/cm² arc flash protection with inherent flame resistance, anti-static performance and a water-repellent 280gsm fleece construction. The 3XL jumper also features reflective tape, secure ribbed cuffs and a practical chest pocket for demanding worksites.
Bool’s HRC2 Arc Flash Two-Tone Water Repellent Fleece Jumper combines 10.6 cal/cm² arc flash protection with inherent flame resistance, anti-static properties and water repellency. Its 280gsm fleece construction, reflective tape and orange/navy design provide practical protection and visibility for electrical and industrial work environments.
Bool’s HRC2 Arc Flash Two Tone Fleece Jumper in 3XL combines 280gsm inherent FR fleece, water repellency, anti-static properties and reflective tape. Rated up to 10.6 cal/cm², it is designed for demanding electrical, industrial and maintenance work environments.
The Bool HRC2 Arc Flash Water Repellent Fleece Jumper combines 10.6 cal/cm² arc flash protection with a 280gsm FR fleece construction for demanding electrical work. This 4XL jumper features water resistance, anti-static fabric, reflective tape, FR ribbing and a practical chest pocket for added workplace functionality.
Bool’s HRC2 Arc Flash Two Tone Water Repellent Fleece Jumper combines 10.6 cal/cm² arc flash protection with a 280gsm flame-resistant fleece construction. The 4XL orange and navy jumper features water repellency, anti-static fabric, FR reflective tape and high-visibility detailing.
HRC2 arc flash protection meets practical electrical workwear needs with this water-repellent, flame-resistant fleece jumper. The 280gsm construction combines Modacrylic, cotton and antistatic fibres, while reflective tape improves visibility. The 4XL size provides a larger fit for electricians and maintenance professionals working in demanding environments.
The Bool HRC2 Arc Flash Water Repellent Fleece Jumper combines inherent flame-resistant protection, anti-static performance, water repellency and high visibility in a practical 280gsm fleece design. Rated to HRC2 and up to 10.6 cal/cm², it is suited to electricians, contractors and maintenance professionals working in demanding electrical and industrial environments. Its 5XL sizing provides a larger fit.