Licensed electricians, contractors, and maintenance professionals face genuine electrical hazards on every job—from arc flash risks to working at heights. iSupply Electrical provides the complete range of certified safety and personal protective equipment (PPE) needed to meet Australian workplace safety standards and protect teams across residential, commercial, and industrial projects.​
Working on or near energised electrical equipment requires flame-retardant clothing, insulated protective equipment, and certified safety gear that meets AS/NZS 4863:2011 standards. iSupply stocks comprehensive safety solutions designed specifically for the electrical trade, from everyday PPE essentials to specialized equipment for high-risk environments.​
The safety category includes boots engineered with non-conductive soles for electrical work, gloves rated for insulation protection, and head protection meeting Australian Standards for impact and electrical hazards. For professionals working above ground, height safety equipment including certified harnesses and fall arrest systems ensures compliance and protection.​
Electrical contractors require specialized protection beyond standard PPE. The electrical rescue kits provide critical emergency response equipment, while liveline equipment enables safe work on energised systems when de-energisation isn’t practical. Comprehensive first aid supplies keep worksites prepared for any incident.​
For hazardous work environments, mats and covers offer insulation and protection from electrical contact. Accurate meters enable safe voltage testing and verification before work begins. Professional lockout systems ensure proper isolation procedures are followed during maintenance and installation work.​
Complete protection means covering every potential exposure point. Upper body protection includes arc-rated shirts and flame-resistant jackets that meet thermal hazard requirements for electrical work. Leg protection encompasses arc-rated trousers and protective chaps designed for the electrical trade.​
For professionals working outdoors year-round, winter protection gear maintains safety ratings while providing weather protection. Pre-assembled kits bundle essential safety equipment for specific applications, ensuring crews have the right protection for each job type. Site and traffic safety equipment keeps work areas properly marked and protected from external hazards.​
All safety and PPE products meet relevant Australian and New Zealand standards including AS/NZS 4863:2011, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. iSupply sources certified equipment that helps electricians and contractors meet workplace health and safety obligations without compromise.​
Browse the complete safety range with live stock levels displayed Australia-wide, competitive wholesale pricing for trade professionals, and fast delivery to keep projects moving safely. Whether outfitting a new crew or restocking essential PPE, iSupply Electrical provides the certified protection Australian electrical professionals rely on.​
Licensed electricians working on or near electrical installations must wear flame-retardant clothing, insulated gloves meeting AS/NZS 2225 standards, non-conductive footwear, safety glasses, and arc-rated face shields when required. Head protection must be non-conductive, and full arm and leg coverage is mandatory for work on energised systems.​
Australian electrical work is governed by AS/NZS 4863:2011 for safe working on low-voltage installations, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. All protective equipment must meet these standards, with insulated gloves requiring testing before first use and every six months thereafter.​
Electrical rescue kits contain specialized equipment for emergency response to electrical incidents, including insulated rescue hooks and equipment for safely removing someone from electrical contact. First aid kits contain medical supplies for treating injuries and must be compliant with workplace requirements for team size and work type.​
Lockout systems ensure electrical equipment remains safely isolated during maintenance, installation, or repair work. Proper lockout procedures prevent accidental re-energisation that could cause serious injury or death, and are required under Australian workplace safety regulations.​
Electricians should wear non-conductive boots with electrical hazard (EH) rating that provide insulation from electrical shock. Steel-toed boots should be avoided as steel conducts electricity—instead, choose composite toe boots that offer impact protection without conductivity risks.​
Yes, insulating mats and covers used for electrical work must be rated for the voltage levels present in the work environment. These products provide temporary insulation and protection from accidental electrical contact when working on or near energised equipment.​
Electricians working at heights require certified harnesses, lanyards, and anchoring systems that meet Australian fall protection standards. Fall arrest equipment must be regularly inspected, and workers must be trained in proper use and self-rescue procedures.​
Insulating gloves must be tested by a qualified third party before initial use and every six months during regular use. Additional testing is required after repairs, if used without leather protectors, or if there are any signs of damage or insulation concerns.​
Showing 129–144 of 748 results
The ArcPlus Ultralight Arc Flash Lift Up Kit provides HRC4 50 cal/cm² protection in a lightweight 315 gsm design. The Orange/Navy 5XL kit includes a Lift-Up Hood, jacket, trousers, dielectric eyewear and high-vis storage bag for professional electrical work.
The ArcPlus Ultralight HRC4 Lift-Up Kit provides 50 cal/cm² arc flash protection in a lightweight, breathable design. This Large kit includes a jacket, trousers, lift-up hood, dielectric eyewear and storage bags, supporting easier movement, communication, donning and doffing for electrical switching work. Designed for demanding workplace environments and electrical applications.
The ArcPlus Ultralight HRC4 Arc Flash Lift-Up Kit provides 50 cal/cm² protection in a lightweight 315 gsm single-layer design. Featuring a breathable construction, Lift-Up Hood, dielectric eyewear, jacket and trousers, it supports safer, more comfortable electrical switching and maintenance work.
The ArcPlus Ultralight HRC4 Lift-Up Kit combines 50 cal/cm² arc flash protection with a lightweight 315 gsm single-layer design. The Orange/Navy kit includes a jacket, trousers, Lift-Up Hood, dielectric eyewear and storage bags for practical electrical work.
Protective PPE for demanding electrical environments, the ArcPlus HRC4 Lift-Up Kit combines 50 cal/cm² arc flash protection with lightweight, breathable construction. The Orange/Navy kit includes jacket, trousers, lift-up hood and dielectric eyewear for professional switching and maintenance work.
The BSD ARC-FS INT PLUS Arc Flash Face Shield & Helmet provides HRC2 14 cal/cm² protection with a retractable shield, chin guard and adjustable fit. Its clear/light smoke tint supports visibility while UV-resistant construction and a protective storage bag help suit regular electrical trade use.
The BSD HRC3 helmet combines a 28 cal/cm² arc flash rating with a retractable face shield, tough chin guard and adjustable rear ratchet. Its clear/light smoke tint supports colour recognition, while UV resistance and included storage bag help maintain durability for demanding electrical work.
The Sherwood Nomex HRC4 Arc Flash Kit in 2XL provides complete protection for electrical work up to 43 cal/cm². The kit includes a hood, jacket, bib trouser, arc flash gloves, MSA V-Gard 500 hard hat and heavy-duty waterproof PPE bag, with multiple hood options available.
The Sherwood Nomex HRC4 Arc Flash Kit provides 43 cal/cm² protection in a complete 3XL PPE package. It includes a hood, jacket, bib-trouser, arc flash gloves, MSA V-Gard 500 hard hat and waterproof PPE bag, with multiple hood options available.
Complete HRC4 PPE kit for electrical work requiring protection up to 43 cal/cm². The Sherwood Nomex kit includes a hood, jacket, bib-trouser, arc flash gloves, MSA V-Gard 500 hard hat and waterproof PPE bag, with multiple hood configurations available.
The Sherwood Nomex HRC4 Arc Flash Standard Kit provides a complete 43 cal/cm² PPE package for electrical professionals working in high-risk environments. It includes a protective hood, jacket, bib trouser, arc flash gloves, hard hat and waterproof PPE bag, with multiple hood options available.
The Sherwood HRC4 Arc Flash Kit provides a complete 43 cal/cm² PPE package for professional electrical applications. With Nomex garments, arc flash gloves, hard hat, hood options and a waterproof PPE bag, it keeps essential protection together for convenient storage, transport and jobsite use.
The Sherwood HRC4 43 cal/cm² Arc Flash Kit in Size S combines essential protective clothing and equipment in one practical package. With multiple hood configurations and a waterproof PPE bag, it provides a convenient PPE solution for demanding electrical work where HRC4-rated protection is required.
Sherwood Nomex HRC4 arc flash kit includes a hood, jacket, bib trouser, gloves, hard hat and waterproof PPE bag. Rated for environments up to 43 cal/cm², it provides a comprehensive PPE solution for electrical contractors, maintenance teams and industrial personnel.
The Sherwood Nomex HRC4 Arc Flash Kit provides complete PPE protection up to 69 cal/cm². The 3XL kit includes a hood, jacket, bib trouser, arc flash gloves, MSA V-Gard 500 hard hat and heavy-duty waterproof PPE bag for professional electrical work.
Sherwood Nomex HRC4 69cal/cm² arc flash kit in Size Large, supplied with hood, jacket, bib trousers, gloves, hard hat and waterproof PPE bag. Designed for high-risk electrical work.