Licensed electricians, contractors, and maintenance professionals face genuine electrical hazards on every job—from arc flash risks to working at heights. iSupply Electrical provides the complete range of certified safety and personal protective equipment (PPE) needed to meet Australian workplace safety standards and protect teams across residential, commercial, and industrial projects.​
Working on or near energised electrical equipment requires flame-retardant clothing, insulated protective equipment, and certified safety gear that meets AS/NZS 4863:2011 standards. iSupply stocks comprehensive safety solutions designed specifically for the electrical trade, from everyday PPE essentials to specialized equipment for high-risk environments.​
The safety category includes boots engineered with non-conductive soles for electrical work, gloves rated for insulation protection, and head protection meeting Australian Standards for impact and electrical hazards. For professionals working above ground, height safety equipment including certified harnesses and fall arrest systems ensures compliance and protection.​
Electrical contractors require specialized protection beyond standard PPE. The electrical rescue kits provide critical emergency response equipment, while liveline equipment enables safe work on energised systems when de-energisation isn’t practical. Comprehensive first aid supplies keep worksites prepared for any incident.​
For hazardous work environments, mats and covers offer insulation and protection from electrical contact. Accurate meters enable safe voltage testing and verification before work begins. Professional lockout systems ensure proper isolation procedures are followed during maintenance and installation work.​
Complete protection means covering every potential exposure point. Upper body protection includes arc-rated shirts and flame-resistant jackets that meet thermal hazard requirements for electrical work. Leg protection encompasses arc-rated trousers and protective chaps designed for the electrical trade.​
For professionals working outdoors year-round, winter protection gear maintains safety ratings while providing weather protection. Pre-assembled kits bundle essential safety equipment for specific applications, ensuring crews have the right protection for each job type. Site and traffic safety equipment keeps work areas properly marked and protected from external hazards.​
All safety and PPE products meet relevant Australian and New Zealand standards including AS/NZS 4863:2011, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. iSupply sources certified equipment that helps electricians and contractors meet workplace health and safety obligations without compromise.​
Browse the complete safety range with live stock levels displayed Australia-wide, competitive wholesale pricing for trade professionals, and fast delivery to keep projects moving safely. Whether outfitting a new crew or restocking essential PPE, iSupply Electrical provides the certified protection Australian electrical professionals rely on.​
Licensed electricians working on or near electrical installations must wear flame-retardant clothing, insulated gloves meeting AS/NZS 2225 standards, non-conductive footwear, safety glasses, and arc-rated face shields when required. Head protection must be non-conductive, and full arm and leg coverage is mandatory for work on energised systems.​
Australian electrical work is governed by AS/NZS 4863:2011 for safe working on low-voltage installations, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. All protective equipment must meet these standards, with insulated gloves requiring testing before first use and every six months thereafter.​
Electrical rescue kits contain specialized equipment for emergency response to electrical incidents, including insulated rescue hooks and equipment for safely removing someone from electrical contact. First aid kits contain medical supplies for treating injuries and must be compliant with workplace requirements for team size and work type.​
Lockout systems ensure electrical equipment remains safely isolated during maintenance, installation, or repair work. Proper lockout procedures prevent accidental re-energisation that could cause serious injury or death, and are required under Australian workplace safety regulations.​
Electricians should wear non-conductive boots with electrical hazard (EH) rating that provide insulation from electrical shock. Steel-toed boots should be avoided as steel conducts electricity—instead, choose composite toe boots that offer impact protection without conductivity risks.​
Yes, insulating mats and covers used for electrical work must be rated for the voltage levels present in the work environment. These products provide temporary insulation and protection from accidental electrical contact when working on or near energised equipment.​
Electricians working at heights require certified harnesses, lanyards, and anchoring systems that meet Australian fall protection standards. Fall arrest equipment must be regularly inspected, and workers must be trained in proper use and self-rescue procedures.​
Insulating gloves must be tested by a qualified third party before initial use and every six months during regular use. Additional testing is required after repairs, if used without leather protectors, or if there are any signs of damage or insulation concerns.​
Showing 49–64 of 748 results
ArcPlus Ultralight HRC4 arc flash kit provides 50 cal/cm² protection in a lightweight 315 gsm single-layer design, including jacket, trousers, hood and dielectric eyewear.
The ArcPlus Ultralight HRC4 Arc Flash Kit combines 50 cal/cm² protection with a lightweight 315 gsm construction for electrical switching and maintenance. The breathable single-layer fabric supports mobility and comfort, while the kit includes jacket, trousers, hood, dielectric eyewear and storage bags for convenient PPE management.
The Sherwood ARC-HOOD4-S-LU+H combines HRC4 43 cal/cm² arc flash protection with a lift-up face shield and adjustable hard hat. Made with inherently flame-resistant materials, it supports communication, ventilation and practical mobility across demanding electrical work environments.
The Sherwood Nomex Arc Flash Lift Up Kit combines essential HRC4 PPE into one convenient package for professional electrical work, with a 43 cal/cm² rating and lift-up hood designed for improved communication and comfort.
Sherwood Nomex Arc Flash HRC4 Lift Up Kit 3XL, rated to 43 cal/cm². Includes hood, jacket, bib trouser, gloves, hard hat and waterproof PPE bag for demanding electrical work.
Protective arc flash equipment should always be selected and used in accordance with the applicable site risk assessment, electrical safety procedures and relevant standards.
The Sherwood Nomex HRC4 Lift Up Kit delivers 43 cal/cm² arc flash protection in a complete PPE package. It includes a Lift Up Hood, jacket, bib trousers, arc flash gloves, hard hat and waterproof PPE bag, providing practical protection for demanding electrical environments.
Sherwood Nomex Arc Flash Lift Up Kit HRC4 43 cal/cm² in Medium provides comprehensive arc flash PPE with a Lift Up Hood, protective clothing, gloves, hard hat and waterproof storage bag.
Sherwood Nomex Arc Flash Lift Up Kit HRC4 43cal/cm² Size S provides a complete PPE configuration for electrical professionals working in HRC4 arc flash environments. The kit includes a lift-up hood, Nomex jacket, bib trousers, arc flash gloves, MSA V-Gard 500 hard hat and waterproof PPE bag. Other sizes are available on request.
A complete HRC4 arc flash PPE kit for demanding electrical environments, this Sherwood Nomex XL Lift Up Kit provides 43 cal/cm² protection with a hood, jacket, bib trousers, gloves, hard hat and waterproof PPE bag. The Lift Up hood supports easier communication while working around high-energy electrical hazards.
The Sherwood Nomex Arc Flash Lift Up Kit combines essential HRC4 PPE into one convenient package, with 69cal/cm² protection and a Lift Up hood designed for practical use in demanding electrical environments. Supplied in 3XL, it includes hood, jacket, bib trouser, gloves, hard hat and PPE bag.
The Sherwood Nomex HRC4 Lift Up Kit provides 69 cal/cm² arc flash protection in a complete package including a Lift Up Hood, jacket, bib trousers, arc flash gloves, hard hat and waterproof PPE bag. Designed for demanding electrical and maintenance environments, it offers practical protection and convenient PPE storage.
The Sherwood Nomex HRC4 Lift Up Kit provides coordinated arc flash protection up to 69 cal/cm². The Medium kit includes a lift-up hood, jacket, bib trousers, arc flash gloves, MSA V-Gard 500 hard hat and heavy-duty waterproof PPE bag for demanding electrical work.
The Sherwood Nomex Arc Flash Lift Up Kit provides HRC4 protection up to 69cal/cm² in a complete XL PPE package. It includes a lift-up hood, jacket, bib trousers, arc flash gloves, MSA V-Gard 500 hard hat and waterproof PPE bag for demanding electrical work.
The Bool Arc Flash Navy D/N Cargo Pants provide HRC2 protection up to 8.6 cal/cm² with breathable Parvotex FR fabric, anti-static properties and practical cargo storage. Size 102R, navy, with reflective tape, belt loops and multiple pockets for demanding electrical and industrial work environments.
Protective arc flash workwear designed for HRC2 environments, the Bool Parvotex Navy D/N Cargo Pants provide up to 8.6 cal/cm² protection with inherent FR fabric. The 102S size features cargo pockets, anti-static properties, reflective tape and a breathable cotton blend for practical electrical and industrial work.