Licensed electricians, contractors, and maintenance professionals face genuine electrical hazards on every job—from arc flash risks to working at heights. iSupply Electrical provides the complete range of certified safety and personal protective equipment (PPE) needed to meet Australian workplace safety standards and protect teams across residential, commercial, and industrial projects.​
Working on or near energised electrical equipment requires flame-retardant clothing, insulated protective equipment, and certified safety gear that meets AS/NZS 4863:2011 standards. iSupply stocks comprehensive safety solutions designed specifically for the electrical trade, from everyday PPE essentials to specialized equipment for high-risk environments.​
The safety category includes boots engineered with non-conductive soles for electrical work, gloves rated for insulation protection, and head protection meeting Australian Standards for impact and electrical hazards. For professionals working above ground, height safety equipment including certified harnesses and fall arrest systems ensures compliance and protection.​
Electrical contractors require specialized protection beyond standard PPE. The electrical rescue kits provide critical emergency response equipment, while liveline equipment enables safe work on energised systems when de-energisation isn’t practical. Comprehensive first aid supplies keep worksites prepared for any incident.​
For hazardous work environments, mats and covers offer insulation and protection from electrical contact. Accurate meters enable safe voltage testing and verification before work begins. Professional lockout systems ensure proper isolation procedures are followed during maintenance and installation work.​
Complete protection means covering every potential exposure point. Upper body protection includes arc-rated shirts and flame-resistant jackets that meet thermal hazard requirements for electrical work. Leg protection encompasses arc-rated trousers and protective chaps designed for the electrical trade.​
For professionals working outdoors year-round, winter protection gear maintains safety ratings while providing weather protection. Pre-assembled kits bundle essential safety equipment for specific applications, ensuring crews have the right protection for each job type. Site and traffic safety equipment keeps work areas properly marked and protected from external hazards.​
All safety and PPE products meet relevant Australian and New Zealand standards including AS/NZS 4863:2011, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. iSupply sources certified equipment that helps electricians and contractors meet workplace health and safety obligations without compromise.​
Browse the complete safety range with live stock levels displayed Australia-wide, competitive wholesale pricing for trade professionals, and fast delivery to keep projects moving safely. Whether outfitting a new crew or restocking essential PPE, iSupply Electrical provides the certified protection Australian electrical professionals rely on.​
Licensed electricians working on or near electrical installations must wear flame-retardant clothing, insulated gloves meeting AS/NZS 2225 standards, non-conductive footwear, safety glasses, and arc-rated face shields when required. Head protection must be non-conductive, and full arm and leg coverage is mandatory for work on energised systems.​
Australian electrical work is governed by AS/NZS 4863:2011 for safe working on low-voltage installations, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. All protective equipment must meet these standards, with insulated gloves requiring testing before first use and every six months thereafter.​
Electrical rescue kits contain specialized equipment for emergency response to electrical incidents, including insulated rescue hooks and equipment for safely removing someone from electrical contact. First aid kits contain medical supplies for treating injuries and must be compliant with workplace requirements for team size and work type.​
Lockout systems ensure electrical equipment remains safely isolated during maintenance, installation, or repair work. Proper lockout procedures prevent accidental re-energisation that could cause serious injury or death, and are required under Australian workplace safety regulations.​
Electricians should wear non-conductive boots with electrical hazard (EH) rating that provide insulation from electrical shock. Steel-toed boots should be avoided as steel conducts electricity—instead, choose composite toe boots that offer impact protection without conductivity risks.​
Yes, insulating mats and covers used for electrical work must be rated for the voltage levels present in the work environment. These products provide temporary insulation and protection from accidental electrical contact when working on or near energised equipment.​
Electricians working at heights require certified harnesses, lanyards, and anchoring systems that meet Australian fall protection standards. Fall arrest equipment must be regularly inspected, and workers must be trained in proper use and self-rescue procedures.​
Insulating gloves must be tested by a qualified third party before initial use and every six months during regular use. Additional testing is required after repairs, if used without leather protectors, or if there are any signs of damage or insulation concerns.​
Showing 417–432 of 748 results
Electrical insulation mat for professional work areas, this 1m x 10m Class 0 1000V roll features flexible EPDM rubber, anti-slip surfaces and AS/NZS IEC 61111 compliance. Designed to help isolate workers from ground potential, it suits electrical, maintenance, commercial and industrial applications.
The Volt Safety MAT-2-R10 is a Class 2 17kV insulated mat roll measuring 1m x 10m, made from flexible EPDM rubber with an anti-slip finish on both sides.
The Volt Safety MAT-4-R10 is a Class 4 36kV insulated mat roll measuring 1m x 10m. Made from flexible EPDM rubber with an anti-slip finish on both sides, it complies with AS/NZS IEC 61111 and IEC 61111 for professional electrical work applications.
The Volt Safety CPR Poster provides a clear reference to the D.R.S.A.B.C.D CPR and Basic Life Support process recommended by the Australian Resuscitation Council. Measuring 600mm x 450mm, it is made from durable, heat-resistant polypropylene, providing a practical and long-lasting safety sign for workplaces, first-aid areas and emergency response locations.
The Volt Safety 12m telescopic insulated stick kit delivers 220kV-rated reach, electrical-grade fibreglass construction, height markings and nine locking sections. It includes a heavy-duty carry bag, nylon fuse puller and disconnect hook, providing electricians and maintenance professionals with a versatile long-reach solution for electrical access applications.
The Volt Safety Insulated Stick Kit Telescopic 2.43m provides electrical professionals with extended insulated reach, fibreglass construction, adjustable five-section extension, and practical accessories for safe electrical access.
The Volt Safety 5.0m Telescopic Insulated Stick Kit provides extended electrical access with a 220kV rating, electrical-rated fibreglass construction and four-section telescopic design. Height markings, locking buttons and a triangular profile support practical operation, while the included carry bag, disconnect hook and nylon fuse puller add convenience for electrical professionals.
The Volt Safety 7.8m Telescopic Insulated Stick Kit provides extended electrical access with a 7.80m reach, six fibreglass sections, height markings and a stable triangular design. Rated to 220kV, it includes a disconnect hook, nylon fuse puller and protective carry bag for professional electrical applications.
Heavy-duty 150mm insulating blanket clamp designed to securely hold LV busbar covers and HV blankets for safer live electrical work up to 1000V.
The BSD CLIP-SML Small Insulating Blanket Clamp is a durable, non-conductive 80mm clamp designed to securely hold compatible LV busbar covers and HV insulating blankets. Made from durable polyethylene with rubber tips, textured grips and an internal spring, it is VDE 0680-1 compliant and rated to 1000V for professional electrical applications.
The Volt Safety Isolate Here In Emergency Sign provides clear identification of an emergency electrical isolation point on or around LV switchboards. Made from lightweight, durable polypropylene, it measures 20cm × 16cm × 1cm and includes an attached rope for convenient hanging, supporting clear communication during emergency rescue procedures.
The Linq 1.85m safety lanyard with absorber and two snap hooks provides reliable fall protection for work at height. Designed for workers up to 140kg including tools, it features UV and solvent resistance, contrast stitching for inspection, and a stretchable design that helps minimise snagging and tripping.
The Volt Safety Large Clamp Circuit Breaker Lockout is designed for securing larger breaker handles during electrical isolation. Made from PA-reinforced nylon, it suits most 480V–600V circuits, handles up to 70mm, and padlock shanks up to 7.5mm.
Lightweight knee pads with moulded foam rubber padding and an adjustable strap, providing comfortable support for electricians, contractors and maintenance professionals.
Large Lockout Bag for organised storage of electrical safety equipment, meters and cables. Heavy-duty construction with 14 compartments, padding and carry options.
The Volt Safety Medium Lockout Bag provides a practical way to store and transport lockout equipment. Its heavy-duty construction, internal padding, two compartments and carry handle help keep essential items organised and protected. The 27 × 29 × 6cm interior can also accommodate two handheld meters when required.