Licensed electricians, contractors, and maintenance professionals face genuine electrical hazards on every job—from arc flash risks to working at heights. iSupply Electrical provides the complete range of certified safety and personal protective equipment (PPE) needed to meet Australian workplace safety standards and protect teams across residential, commercial, and industrial projects.​
Working on or near energised electrical equipment requires flame-retardant clothing, insulated protective equipment, and certified safety gear that meets AS/NZS 4863:2011 standards. iSupply stocks comprehensive safety solutions designed specifically for the electrical trade, from everyday PPE essentials to specialized equipment for high-risk environments.​
The safety category includes boots engineered with non-conductive soles for electrical work, gloves rated for insulation protection, and head protection meeting Australian Standards for impact and electrical hazards. For professionals working above ground, height safety equipment including certified harnesses and fall arrest systems ensures compliance and protection.​
Electrical contractors require specialized protection beyond standard PPE. The electrical rescue kits provide critical emergency response equipment, while liveline equipment enables safe work on energised systems when de-energisation isn’t practical. Comprehensive first aid supplies keep worksites prepared for any incident.​
For hazardous work environments, mats and covers offer insulation and protection from electrical contact. Accurate meters enable safe voltage testing and verification before work begins. Professional lockout systems ensure proper isolation procedures are followed during maintenance and installation work.​
Complete protection means covering every potential exposure point. Upper body protection includes arc-rated shirts and flame-resistant jackets that meet thermal hazard requirements for electrical work. Leg protection encompasses arc-rated trousers and protective chaps designed for the electrical trade.​
For professionals working outdoors year-round, winter protection gear maintains safety ratings while providing weather protection. Pre-assembled kits bundle essential safety equipment for specific applications, ensuring crews have the right protection for each job type. Site and traffic safety equipment keeps work areas properly marked and protected from external hazards.​
All safety and PPE products meet relevant Australian and New Zealand standards including AS/NZS 4863:2011, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. iSupply sources certified equipment that helps electricians and contractors meet workplace health and safety obligations without compromise.​
Browse the complete safety range with live stock levels displayed Australia-wide, competitive wholesale pricing for trade professionals, and fast delivery to keep projects moving safely. Whether outfitting a new crew or restocking essential PPE, iSupply Electrical provides the certified protection Australian electrical professionals rely on.​
Licensed electricians working on or near electrical installations must wear flame-retardant clothing, insulated gloves meeting AS/NZS 2225 standards, non-conductive footwear, safety glasses, and arc-rated face shields when required. Head protection must be non-conductive, and full arm and leg coverage is mandatory for work on energised systems.​
Australian electrical work is governed by AS/NZS 4863:2011 for safe working on low-voltage installations, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. All protective equipment must meet these standards, with insulated gloves requiring testing before first use and every six months thereafter.​
Electrical rescue kits contain specialized equipment for emergency response to electrical incidents, including insulated rescue hooks and equipment for safely removing someone from electrical contact. First aid kits contain medical supplies for treating injuries and must be compliant with workplace requirements for team size and work type.​
Lockout systems ensure electrical equipment remains safely isolated during maintenance, installation, or repair work. Proper lockout procedures prevent accidental re-energisation that could cause serious injury or death, and are required under Australian workplace safety regulations.​
Electricians should wear non-conductive boots with electrical hazard (EH) rating that provide insulation from electrical shock. Steel-toed boots should be avoided as steel conducts electricity—instead, choose composite toe boots that offer impact protection without conductivity risks.​
Yes, insulating mats and covers used for electrical work must be rated for the voltage levels present in the work environment. These products provide temporary insulation and protection from accidental electrical contact when working on or near energised equipment.​
Electricians working at heights require certified harnesses, lanyards, and anchoring systems that meet Australian fall protection standards. Fall arrest equipment must be regularly inspected, and workers must be trained in proper use and self-rescue procedures.​
Insulating gloves must be tested by a qualified third party before initial use and every six months during regular use. Additional testing is required after repairs, if used without leather protectors, or if there are any signs of damage or insulation concerns.​
Showing 321–336 of 748 results
Reliable Class 0 electrical insulating protection for professional electricians. The Volt Safety GLOVE0 280-08 features premium latex rubber construction, ergonomic comfort and a rolled-edge cuff. Rated up to 1000V and compliant with IEC 60903, it provides dependable dielectric hand protection for low-voltage electrical applications and professional maintenance work.
Class 0 insulated gloves provide dependable electrical protection up to 1000V while combining flexible latex construction with an ergonomic design for professional electrical work. Size 09 features a 360mm length, rolled edge cuff and IEC 60903 compliance.
The Volt Safety GLOVE0 280-09 Insulated Glove Class 0 provides 1000V electrical insulation in a comfortable, flexible 280mm design. Made from premium latex rubber with an ergonomic fit and rolled edge cuff, it delivers dependable dielectric protection for licensed electricians and maintenance professionals working on suitable low-voltage electrical applications.
Volt Safety Class 0 Size 09.5 insulated gloves provide flexible, durable electrical protection for electricians working on or near electrical equipment. Rated to 1000V and manufactured from premium latex rubber, they feature an ergonomic design, 360mm length, rolled-edge cuff and flared opening for comfort and practicality.
Class 0 1000V insulated electrical gloves designed for safe, flexible protection and all-day comfort for licensed electricians.
Class 0 insulated gloves provide electrical protection for qualified electrical professionals working on or near electrical equipment. This size 10 glove features premium latex rubber construction, a 280mm length and rolled-edge cuff for comfortable handling. Rated to 1000V and manufactured to IEC 60903, it suits demanding electrical trade applications.
Class 0 insulated gloves provide up to 1000V protection for electrical work, with flexible latex construction, ergonomic comfort, a rolled edge cuff and IEC 60903 compliance.
Protective equipment should always be selected and used according to the specific electrical task, workplace requirements and applicable safety procedures.
Volt Safety Class 0 insulated gloves provide 1000V electrical protection with flexible latex construction, ergonomic comfort and a 280mm rolled-edge cuff for professional electrical work.
Volt Safety Class 0 insulated glove, size 12, provides 1000V electrical protection with flexible latex construction, ergonomic comfort and an IEC 60903 compliant design.
Class 00 insulated electrical gloves provide 500V protection for electrical work. Volt Safety GLOVE00-07 features premium latex, an ergonomic design, rolled-edge cuff and IEC 60903 compliance for professional applications.
Insulated Glove Class 00 Size 08 500V provides electrical protection with flexible latex construction, ergonomic comfort and a rolled-edge cuff for professional trade use.
Protect your hands during suitable low-voltage electrical work with the Volt Safety GLOVE00-09 Class 00 insulated glove. Rated to 500V and manufactured to IEC 60903, this size 09 glove features premium latex rubber, an ergonomic design, 280mm length, rolled-edge cuff, and flexible construction for comfortable professional use.
Class 00 insulated gloves from Volt Safety provide 500V electrical protection with flexible latex construction, an ergonomic design and rolled-edge cuff. Size 10 gloves measure 280mm long and comply with IEC 60903, making them suitable for professional electrical work.
Class 00 insulated electrical glove in size 11, rated to 500V and manufactured from flexible latex rubber. IEC 60903 compliant with an ergonomic design, 280mm length and rolled-edge cuff for comfortable electrical work.
Volt Safety GLOVE00-12 Class 00 insulated gloves provide 500V electrical protection with premium latex construction, an ergonomic design and flexible fit. The 280mm red gloves feature a rolled-edge flared cuff for comfortable clothing clearance and circulation, making them suitable for professional electrical work and maintenance applications.