Licensed electricians, contractors, and maintenance professionals face genuine electrical hazards on every job—from arc flash risks to working at heights. iSupply Electrical provides the complete range of certified safety and personal protective equipment (PPE) needed to meet Australian workplace safety standards and protect teams across residential, commercial, and industrial projects.
Working on or near energised electrical equipment requires flame-retardant clothing, insulated protective equipment, and certified safety gear that meets AS/NZS 4863:2011 standards. iSupply stocks comprehensive safety solutions designed specifically for the electrical trade, from everyday PPE essentials to specialized equipment for high-risk environments.
The safety category includes boots engineered with non-conductive soles for electrical work, gloves rated for insulation protection, and head protection meeting Australian Standards for impact and electrical hazards. For professionals working above ground, height safety equipment including certified harnesses and fall arrest systems ensures compliance and protection.
Electrical contractors require specialized protection beyond standard PPE. The electrical rescue kits provide critical emergency response equipment, while liveline equipment enables safe work on energised systems when de-energisation isn’t practical. Comprehensive first aid supplies keep worksites prepared for any incident.
For hazardous work environments, mats and covers offer insulation and protection from electrical contact. Accurate meters enable safe voltage testing and verification before work begins. Professional lockout systems ensure proper isolation procedures are followed during maintenance and installation work.
Complete protection means covering every potential exposure point. Upper body protection includes arc-rated shirts and flame-resistant jackets that meet thermal hazard requirements for electrical work. Leg protection encompasses arc-rated trousers and protective chaps designed for the electrical trade.
For professionals working outdoors year-round, winter protection gear maintains safety ratings while providing weather protection. Pre-assembled kits bundle essential safety equipment for specific applications, ensuring crews have the right protection for each job type. Site and traffic safety equipment keeps work areas properly marked and protected from external hazards.
All safety and PPE products meet relevant Australian and New Zealand standards including AS/NZS 4863:2011, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. iSupply sources certified equipment that helps electricians and contractors meet workplace health and safety obligations without compromise.
Browse the complete safety range with live stock levels displayed Australia-wide, competitive wholesale pricing for trade professionals, and fast delivery to keep projects moving safely. Whether outfitting a new crew or restocking essential PPE, iSupply Electrical provides the certified protection Australian electrical professionals rely on.
Licensed electricians working on or near electrical installations must wear flame-retardant clothing, insulated gloves meeting AS/NZS 2225 standards, non-conductive footwear, safety glasses, and arc-rated face shields when required. Head protection must be non-conductive, and full arm and leg coverage is mandatory for work on energised systems.
Australian electrical work is governed by AS/NZS 4863:2011 for safe working on low-voltage installations, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. All protective equipment must meet these standards, with insulated gloves requiring testing before first use and every six months thereafter.
Electrical rescue kits contain specialized equipment for emergency response to electrical incidents, including insulated rescue hooks and equipment for safely removing someone from electrical contact. First aid kits contain medical supplies for treating injuries and must be compliant with workplace requirements for team size and work type.
Lockout systems ensure electrical equipment remains safely isolated during maintenance, installation, or repair work. Proper lockout procedures prevent accidental re-energisation that could cause serious injury or death, and are required under Australian workplace safety regulations.
Electricians should wear non-conductive boots with electrical hazard (EH) rating that provide insulation from electrical shock. Steel-toed boots should be avoided as steel conducts electricity—instead, choose composite toe boots that offer impact protection without conductivity risks.
Yes, insulating mats and covers used for electrical work must be rated for the voltage levels present in the work environment. These products provide temporary insulation and protection from accidental electrical contact when working on or near energised equipment.
Electricians working at heights require certified harnesses, lanyards, and anchoring systems that meet Australian fall protection standards. Fall arrest equipment must be regularly inspected, and workers must be trained in proper use and self-rescue procedures.
Insulating gloves must be tested by a qualified third party before initial use and every six months during regular use. Additional testing is required after repairs, if used without leather protectors, or if there are any signs of damage or insulation concerns.
Showing 273–288 of 748 results
The Volt Safety EV Rescue Wall Mounted Kit provides readily accessible emergency rescue equipment for EV workplaces, including Class 0 insulated gloves, LV and HV hook/crooks, burn dressings, thermal and fire blankets, CPR mask, torch and first-aid supplies. Rated up to 1000V, it keeps essential rescue equipment organised and ready on-site.
The Volt Safety Fire Blanket provides a compact and practical emergency fire suppression solution for electrical workplaces. Made from woven fibreglass fire-retardant fabric, it quickly helps suppress fires by eliminating oxygen. Release tabs, hanging eyelets and AS 3504 compliance make it suitable for accessible workplace safety preparedness.
The First Aid Kit – Vehicle FAR1V30 is a compact, R1 rated first aid kit designed for convenient vehicle storage. Supplied in a soft case and sized to fit in a glove box, it provides mobile electricians, contractors and maintenance professionals with accessible first aid provisions while travelling between jobs.
FastAid KIT-EFA electrical first aid kit provides organised supplies for rapid initial injury treatment, with a burn module, reflective soft pack, and colour-coded contents for easy access. Designed for electrical workers, it suits workplaces of up to 25 people and supports both low-risk and high-risk environments where accessible first aid equipment is essential.
Keep essential first aid guidance close at hand with the St John First Aid Quick Reference. This compact A6 booklet provides easy-to-understand, step-by-step instructions covering DRSABCD and common emergencies including shock, bleeding, burns, cardiac emergencies, head injuries and seizures.
The Sherwood ARC-BALACLAVA2 is a double-layer 200gsm Nomex IIIA FR balaclava designed for head and neck coverage in arc flash environments. Its lightweight construction, flat seams and helmet-compatible design support comfortable wear during electrical work and maintenance applications.
Keep electrical gloves and essential accessories organised in the Volt Safety Glove Bag Single Compartment. Its durable canvas construction, water-resistant design and expandable compartment provide practical storage for insulated gloves, inners, outers and talc, while the hook allows convenient attachment to a fixed point.
Store insulated gloves and accessories neatly with this durable, water-resistant three-compartment canvas glove bag. Designed for electricians and maintenance professionals, it features expandable storage, secure hook and loop closure, plus an integrated attachment hook.
A 2.3m Ferno pole strap with double-action hooks designed for safe, compliant fall restraint in elevated electrical work.
The Ferno 4.0M Pole Strap provides a practical combination of restraint, secure attachment and webbing protection for professional trade applications. With two double-action alloy hooks and compliance with AS 1891.5:2020, it is designed to meet the needs of demanding Australian work environments.
The Linq H402-S Supreme Tower Worker Harness provides comfortable, adjustable support for fall arrest, work positioning, tower work, construction, scaffolding, ladders and confined-space applications, featuring durable UV-stabilised webbing, practical connection points, padded support and compliance with AS/NZS 1891.1.
The Hi-Viz Safety Vest in Large offers a practical orange layer for daytime work, helping tradespeople remain visually identifiable across active work areas. With no reflectors and a simple design, it is suitable for electricians, contractors, maintenance teams, builders, and other workers who need a straightforward hi-viz vest in an easy-to-store hang-pack format.
Stay visible during daytime site work with this XL Hi-Viz Safety Vest in bright orange. Designed for practical everyday use, it provides a noticeable outer layer for electricians, contractors, maintenance professionals and site workers. The simple no-reflector design comes in an extra-large size and convenient hang-pack format.
The Hi-Viz Safety Vest with Reflectors in Large size provides a practical high-visibility layer for electricians, contractors and maintenance professionals. Its orange design and reflective elements support improved visibility during daytime and night-time work, making it suitable for construction, electrical, maintenance and other active work environments.
The Hi-Viz Safety Vest with Reflectors in XL provides a simple, practical visibility solution for tradespeople and site workers. Featuring an orange high-visibility colour, reflective elements and an XL fit, it is suitable for day and night use across electrical, construction and maintenance environments. Supplied in a convenient hang pack.
Volt Safety High Voltage Leather Outer Gloves Size 08 provide mechanical protection for insulated electrical gloves against abrasions, cuts, tears and perforations. Made from water-resistant cowhide, they feature a 320mm length and Velcro tightening cuff. Designed for movement and dexterity, these yellow outer gloves suit demanding electrical trade applications.