Licensed electricians, contractors, and maintenance professionals face genuine electrical hazards on every job—from arc flash risks to working at heights. iSupply Electrical provides the complete range of certified safety and personal protective equipment (PPE) needed to meet Australian workplace safety standards and protect teams across residential, commercial, and industrial projects.
Working on or near energised electrical equipment requires flame-retardant clothing, insulated protective equipment, and certified safety gear that meets AS/NZS 4863:2011 standards. iSupply stocks comprehensive safety solutions designed specifically for the electrical trade, from everyday PPE essentials to specialized equipment for high-risk environments.
The safety category includes boots engineered with non-conductive soles for electrical work, gloves rated for insulation protection, and head protection meeting Australian Standards for impact and electrical hazards. For professionals working above ground, height safety equipment including certified harnesses and fall arrest systems ensures compliance and protection.
Electrical contractors require specialized protection beyond standard PPE. The electrical rescue kits provide critical emergency response equipment, while liveline equipment enables safe work on energised systems when de-energisation isn’t practical. Comprehensive first aid supplies keep worksites prepared for any incident.
For hazardous work environments, mats and covers offer insulation and protection from electrical contact. Accurate meters enable safe voltage testing and verification before work begins. Professional lockout systems ensure proper isolation procedures are followed during maintenance and installation work.
Complete protection means covering every potential exposure point. Upper body protection includes arc-rated shirts and flame-resistant jackets that meet thermal hazard requirements for electrical work. Leg protection encompasses arc-rated trousers and protective chaps designed for the electrical trade.
For professionals working outdoors year-round, winter protection gear maintains safety ratings while providing weather protection. Pre-assembled kits bundle essential safety equipment for specific applications, ensuring crews have the right protection for each job type. Site and traffic safety equipment keeps work areas properly marked and protected from external hazards.
All safety and PPE products meet relevant Australian and New Zealand standards including AS/NZS 4863:2011, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. iSupply sources certified equipment that helps electricians and contractors meet workplace health and safety obligations without compromise.
Browse the complete safety range with live stock levels displayed Australia-wide, competitive wholesale pricing for trade professionals, and fast delivery to keep projects moving safely. Whether outfitting a new crew or restocking essential PPE, iSupply Electrical provides the certified protection Australian electrical professionals rely on.
Licensed electricians working on or near electrical installations must wear flame-retardant clothing, insulated gloves meeting AS/NZS 2225 standards, non-conductive footwear, safety glasses, and arc-rated face shields when required. Head protection must be non-conductive, and full arm and leg coverage is mandatory for work on energised systems.
Australian electrical work is governed by AS/NZS 4863:2011 for safe working on low-voltage installations, AS/NZS 2225 for insulating gloves, and AS/NZS 3760:2022 for electrical safety. All protective equipment must meet these standards, with insulated gloves requiring testing before first use and every six months thereafter.
Electrical rescue kits contain specialized equipment for emergency response to electrical incidents, including insulated rescue hooks and equipment for safely removing someone from electrical contact. First aid kits contain medical supplies for treating injuries and must be compliant with workplace requirements for team size and work type.
Lockout systems ensure electrical equipment remains safely isolated during maintenance, installation, or repair work. Proper lockout procedures prevent accidental re-energisation that could cause serious injury or death, and are required under Australian workplace safety regulations.
Electricians should wear non-conductive boots with electrical hazard (EH) rating that provide insulation from electrical shock. Steel-toed boots should be avoided as steel conducts electricity—instead, choose composite toe boots that offer impact protection without conductivity risks.
Yes, insulating mats and covers used for electrical work must be rated for the voltage levels present in the work environment. These products provide temporary insulation and protection from accidental electrical contact when working on or near energised equipment.
Electricians working at heights require certified harnesses, lanyards, and anchoring systems that meet Australian fall protection standards. Fall arrest equipment must be regularly inspected, and workers must be trained in proper use and self-rescue procedures.
Insulating gloves must be tested by a qualified third party before initial use and every six months during regular use. Additional testing is required after repairs, if used without leather protectors, or if there are any signs of damage or insulation concerns.
Showing 689–704 of 748 results
INSULATION GLOVES 1000V S11 provide reliable electrical protection for electricians and contractors. Made from high dielectric natural rubber, these AS2225 gloves offer insulation performance up to 1000V and are available in sizes 9–11.
The ISOLATE SIGN provides clear identification of electrical isolation points, helping electricians and maintenance teams improve safety awareness before working on live or near-live electrical parts.
Elastic 2m fall arrest lanyard designed for height safety applications. Its elastic construction extends up to 2 metres while helping reduce trip hazards and maintain a cleaner workspace for electricians, contractors, and maintenance professionals working at height.
Protect high voltage insulating gloves from abrasion and wear with the Live Line HV Outer Glove Cowhide S11. Made from durable cowhide leather and designed for Class 1–4 HV gloves, it delivers excellent dexterity, dependable protection, and long-lasting performance for professional electricians working in demanding industrial and utility environments.
LOCK BOX METAL designed for group lockout work, featuring durable construction, high-visibility red colour, and multiple lockout loops for multi-user safety systems.
A wall-mounted lockout station designed for up to 10 users, supplied with 10 locks, 4 hasps, and 10 tags to keep safety equipment organised and accessible.
Wall-mounted lockout station kit designed to support up to 10 users with locks, hasps, and tags for safe site isolation.
Wall-mounted lockout station kit designed to support up to 20 personnel with essential locks, hasps, and tags for safer maintenance control.
The Lockout 5 Station Board provides organised storage for lockout tagout equipment, helping electricians and maintenance teams keep safety locks and tags accessible. Designed for workplaces requiring efficient LOTO management, this board supports improved safety organisation. Locks and tags are sold separately for customised lockout setups.
A complete lockout station kit designed for up to 5 users, including 5 locks, 3 hasps, and 10 tags. Wall-mounted for easy access during electrical maintenance and isolation procedures.
Universal adjustable gate valve lockout device designed to secure a wide range of gate and screw valves during maintenance. Featuring a highly visible red design and Danger label, it helps improve workplace safety by preventing accidental valve operation during servicing procedures.
The LOCKOUT BAG EMPTY is a quality zip pouch designed to store and organise basic lockout essentials. Ideal for electrical contractors, electricians, and maintenance professionals needing convenient access to safety equipment on-site.
The LOCKOUT COMBO CB 5 OFF is a 5-piece circuit breaker lockout kit designed for safe electrical isolation. Suitable for most breakers, from miniature toggle types to large industrial breakers.
Universal gas bottle lockout device designed to fit most gas bottle tops. Features a green base and “FULL” label for quick identification, helping improve workplace safety, organisation, and lockout procedures.
The LOCKOUT GAS BOTTLE RED EMPTY is a universal gas bottle lockout device designed to fit most gas bottles. Featuring a yellow body, red base, and “empty” label, it provides clear identification and supports safer lockout/tagout procedures for trade and industrial applications.
LOCKOUT HASP VINYL COATED is a durable plated steel lockout/tagout hasp with red vinyl coating, designed to secure equipment using up to six padlocks for safer maintenance procedures.