The right digital TV antenna depends on where the property is, not on what was on the roof before. Three things decide it: which band your local transmitter broadcasts on, how far away that transmitter is, and what sits between it and the antenna.
A site close to a transmission tower with a clear line of sight usually needs only a compact metropolitan antenna. Further out, or where hills, buildings and trees block the path, a higher-gain antenna with more elements captures a weaker signal more reliably. Bigger is not always better, though. An oversized antenna in a strong signal area adds cost and wind load without improving the picture.
Rather than guessing, enter the installation address into our Antenna Finder. It uses ACMA transmitter data and terrain between the site and the tower to recommend an antenna, then shows the direction to point it.
Australian free-to-air television is broadcast on two bands, and your antenna has to match the one used in your area.
Within each band you will find Yagi, log periodic and phased array designs. Yagi antennas are directional and come in a range of element counts, from 4 element metropolitan models up to 18 element outer metropolitan and fringe models. Log periodic antennas are compact and suit strong signal areas. Phased arrays are a common choice for UHF fringe reception.
Many antennas in the range include 4G/5G filtering. These reject mobile network signals that can otherwise cause pixelation and dropouts, which makes them worth choosing for any site near a mobile tower.
An antenna is only one part of a reliable installation. Every splitter and every metre of cable reduces the signal that reaches the TV, so plan the whole run before you order.
An amplifier is not a substitute for the correct antenna. It boosts whatever the antenna receives, including noise, so start with an antenna suited to the site and add amplification only where the system needs it. Choose “complete system” in the Antenna Finder and it will build the full parts list for you, including cable, splitters and outlets.
iSupply Electrical supplies digital TV antennas for single homes, apartment buildings, hospitality venues, schools, aged care facilities and commercial fit-outs. Trade packs are available on selected models for installers who fit the same antenna regularly.
For larger buildings with many outlets, the antenna usually feeds a distribution system rather than individual TVs, so allow for future expansion when you choose gain and amplification. If you need help specifying a job, call us on (02) 9760 2565 or get in touch.
It depends on the band your local transmitter uses, your distance from it and any obstructions in between. The quickest way to check is to enter your address into the Antenna Finder, which recommends an antenna for that exact site.
Match the antenna to your transmitter. Most capital city main transmitters use VHF, while many regional transmitters and local translators use UHF. If your area is served by both, choose a combination antenna.
They are built for different signal strengths. Metropolitan antennas have fewer elements and suit strong signal areas. Outer metropolitan and fringe antennas have more elements and higher gain to capture weaker signals from further away.
Directly at the transmitter that serves your area, with the elements mounted to match its polarisation (horizontal or vertical). The Antenna Finder shows the transmitter direction, distance and polarisation for your address.
Not always. Amplifiers are used where long cable runs or multiple televisions cause signal loss, but they should not replace proper antenna selection.
Yes. With the correct splitters and distribution equipment, a single antenna can supply multiple televisions throughout a property.
It blocks mobile network signals that sit close to the TV broadcast band. Without filtering, a nearby mobile tower can cause pixelation and dropouts even when the TV signal itself is strong.
Most modern televisions with a built-in digital tuner work with any compatible digital TV antenna. Older televisions may need a set top box.
In many cases, yes. However, damaged or ageing cable affects signal quality and may need replacing to get the best result from a new antenna.
Common causes are weak reception, an antenna pointed the wrong way, damaged cabling or connectors, obstructions such as trees and buildings, mobile network interference and too many splits without amplification.
Showing 33–48 of 92 results
The Hills Antenna Tru-Max 18 4G Antenna FB608602-4G provides reliable UHF digital TV reception for regional applications. Featuring Band 4+ operation, channels 28–51 and integrated 4G filtering, it combines a lightweight aluminium construction with Boomlock™ technology and a sealed balun for dependable, long-lasting outdoor installation performance.
Keep essential CPR guidance visible with the Volt Safety CPR Poster. Measuring 600mm x 450mm, it displays the D.R.S.A.B.C.D CPR and Basic Life Support process in a clear, logical sequence. Made from durable, heat-resistant polypropylene, it provides workplaces, workshops, and safety areas with readily accessible CPR information.
High-gain 17-element UHF Yagi antenna with integrated 4G/5G filter, designed for reliable fringe-area TV reception and fast trade installation.
The Hills Antenna Tru-Spec TSF2851 is a UHF Yagi antenna for digital TV in fringe signal areas, covering channels 28–51 with durable aluminium construction and reliable PCB balun technology.
Hills Tru-Spec TSP2851 4G UHF antenna provides reliable digital TV reception across channels 28–51, with an included 4G filter, lightweight aluminium construction and installation-focused design for domestic and commercial applications.
The Hills Antenna Tru-Spec TSP2851 is a lightweight aluminium UHF Yagi antenna for digital TV installations in prime signal areas, covering channels 28–51. Featuring Boomlock™ technology, a safer mounting clamp, sealed balun housing and PCB balun, it suits reliable domestic and commercial applications.
The Skyline QPA18 Medium UHF 4G Antenna G11890 is a medium-gain phased array panel antenna for low-profile installations, featuring a folding design, sealed balun, polished aluminium construction, F-Type connector and built-in LTE filter.
A high-gain phased array antenna for large-scale residential projects, the Skyline QPA36 UHF Antenna G11892 is designed for fringe reception. Its folding construction, sealed balun, polished aluminium finish, F-Type connector and built-in LTE filter support practical installation and reliable outdoor performance.
The MATCHMASTER 03MM-1EFM FM + UHF LTE Diplexer Aerial provides reliable 88–108MHz FM reception with built-in LTE filtering, FM/UHF separation, and a quick mounting clamp for efficient installation.
Upgrade your digital TV installations with the MATCHMASTER 02MM-MDU36 X-Type Magna Phased Array UHF Antenna, featuring 12dB gain and built-in 4G/5G LTE filtering for clearer reception.
MATCHMASTER DR3006PB 6 element VHF Yagi antenna delivers reliable channels 6-12 reception with 4G/5G LTE filtering, durable aluminium construction, and fast installation.
Designed for electricians needing reliable VHF reception, this 16-element Matchmaster antenna delivers strong 12.5dB gain, snap-lock assembly, and durable 12.7mm construction for professional TV installations.
Reliable VHF phased array antenna with 8-element construction, delivering strong 9.5dB gain for channels 6–12. Built tough with 12.7mm elements and included balun, ideal for fast, professional installations.
MATCHMASTER Magna Digital UHF phased array antenna with built-in 4G/5G LTE filter, delivering reliable reception and reduced interference for professional installations.
Improve digital TV reception with the Australian-made MATCHMASTER 91 Element Digimatch antenna. Featuring 16dB gain and an integrated 694MHz LTE filter, it reduces 4G/5G interference while delivering reliable UHF Channels 28–51 reception for residential and commercial installations.
Improve digital TV and DAB+ reception with the Matchmaster 03MM-DR3004 four-element VHF antenna. Featuring a built-in 4G/5G LTE filter, durable aluminium construction, 7dB gain and quick snap-lock assembly, it delivers reliable performance for professional residential and commercial installations across Australian metropolitan reception areas.