Galvanised Hex Sleeve Anchor M10X100 POWHS10100G-PWR
$71.35 inc GST
The Galvanised Hex Sleeve Anchor M10 × 100mm is a pre-assembled fixing for medium-duty anchoring into concrete and masonry. Featuring a precision expansion sleeve, tapered plow bolt and ratchet teeth, it is suitable for securing timber and steel fixtures with a maximum fixture thickness of 55mm.
Fast Shipping
On All Orders
Australian Company
Owned & Operated
15+ Years
Industry Experience
Easy Returns
30 Days Peace Of Mind
20 in stock
Description
Galvanised M10 × 100mm Sleeve Anchor for Secure Fixing
The Galvanised Hex Sleeve Anchor M10 × 100mm provides a practical medium-duty anchoring solution for securing timber and steel fixtures to suitable concrete and masonry substrates. Designed as a pre-assembled single unit, it offers a straightforward fixing option for electricians, builders, contractors and maintenance professionals. The galvanised finish provides a suitable option for general construction and installation environments where a protective plated finish is required.
Designed for Efficient Masonry Installation
This sleeve anchor features a precision-stamped tubular expansion sleeve designed to lock firmly within the drilled hole. During tightening, the specially tapered plow bolt is drawn into the expansion sleeve to create the expansion action required for fixing.
The ratchet teeth design helps provide a strong hold against the fixture, supporting secure attachment when the anchor is correctly installed. Its 10mm anchor size is designed for a corresponding 10mm drilled hole, providing a defined installation specification for trade applications. With a 100mm overall length and a minimum embedment depth of 40mm, this anchor accommodates fixtures up to 55mm thick according to the supplied specifications.
Specifications and Trade Applications
The Galvanised Hex Sleeve Anchor M10 × 100mm offers a practical fixing solution where defined anchor dimensions and medium-duty masonry anchoring are required. Always verify substrate suitability, embedment requirements and fixture thickness before installation.
Key Specs
- Product: Galvanised Hex Sleeve Anchor
- Model: POWHS10100G-PWR
- Size: M10
- Length: 100mm
- Finish: Galvanised
- Minimum embedment depth: 40mm
- Maximum fixture thickness: 55mm
- Drilled hole: 10mm
- Socket size: 13mm
- Anchor type: Sleeve anchor
- Design: Pre-assembled single unit
- Application: Medium-duty general anchoring
Ideal For
- Securing timber fixtures to concrete
- Fixing steel fixtures to masonry
- Electrical installation projects
- Building and construction work
- Commercial fit-outs and maintenance
- Medium-duty anchoring applications
- Suitable concrete, block, brick and stone substrates
Additional information
| Type | |
|---|---|
| Brand |
